reccomended tire size.

[bigpoppa694lyfe]

so i lowered my car 2 inches and i have 18 inch rims... Any1 have the same combo that can give me a tire size that wont rub the shit outta everything???

[H22WAGON93]

215-35-18. But I might go 215-40-18

[kouzie]

I used to have 18s with 215/35/R18..And about 2.5-3" drop
Won't rub unless you're doing a hard turn such as u-turn.

[wed3k]

go with a 195/30 and stretch the shit out of the tire.

[bigpoppa694lyfe]

i hate the stretch'd look. Plus the roads here r way 2 shitty 4 a stretch'd tire

[crazyl69]

I too have 18 in my 91 Accord. My rim size are 18x5 all around and tire size are 225/40ZR18. At first, the rears use to rub against the quarter panels until one day, I decided to shave off a bit from the inner lip that holds the rubber molding in place from the quarter panel. By using a mid size grinder I was able to successfully shave off just about enough from the lip, giving me enough clearance. This was done on both sides. NO MORE RUBBING and the rubber molding totally gone. The areas that were grinded off, I had them painted so they don't start to rust. From the front wheels, I've never had an issued with them rubbing.

[PrOjEcT2DRCB7]

When I owned a integra it was lowered on 2.5" lowering springs with 17's i had 205/40/17s..having and i rubber just makin u-turns.. 18s on a accord looks too big. More weight on your brakes means more pad wear.

I have a 91 Cb7 now and i plan on puttin 17s nothin higher.

[mercyboy]

i have 225/40/18....i think a 2inch will still be good it's just the offset that will make it hard to fit!!! cause it might rub other than try it