Blackhoused my lights

[crazymikey]

Actually,those are the headlights from the parts car.

I really didn't enjoy doing this project, and not happy enough with my results to do it for someone else and be paid for it.

Oh,on another note, the fog in my lenses seems to be slowly going away. I noticed after I had driven around with my lights on there was much less fog in them when I got home.

[masarwar]

oh no worries, but you didnt had any issues in taking out the headlight and putting them back on? is it easy? I am thinking about buying those ebay 1 pc headlights and i suck at taking the bumper off

[crazymikey]

I think I had my bumper off in about 5 minutes. It's really easy. There's a nut on each side in the engine bay, one infront of the battery, beside the coolant resevoir, and one on the other side below the cruise control, right by the alternator.

Then take out the bumper lights and theres two 12mm bolts on each side behind where the lights mount. Then, on the bottom of the bumper, there is one 10mm bolt below the corner lights, and then 2 screws on each side on the back of the bumper in the fender well.

To get the headlights out, there's two 10mm bolts on the top of the radiator support, 2 plastic brackets with 10mm bolts behind where the bumper would be, and one 10mm bolt on each side under the corner light. Once the bulbs are disconnected,the headlight assembly will slide right out.

I had my bumper and lights off in about 15 min.

[masarwar]

Thanks man, thats neat! hopefully i will be doing some front end work soon (as soon as this bloody winter ends)

[crazymikey]

well,atleast baking the headlights in the oven could keep you warm

[jamaicancb3]

IMO i think that flat blackin the grill wud make it look better tho...good job tho fail on ur hand having its period LMAO

[crazymikey]

I'm a chrome and black kinda guy. I like both equally. The grille has black and chrome...so do the lights. So it evens out.

[crazymikey]

Little update. The fog is going away in the lights. It's concentrated just in the high beam area right now. Otherwise they are looking really good!

Light output is still the same and overall, I am very happy with the end result of this mod!

[slammed91cb7]

those turned out looking pretty good i need to do mine

[crazymikey]

Just an update, the fog has now completely dissipated and mylights are crystal clear and badass.

Gotten alot of comments on them already