Drinking Tray Broken

[PrincessKamiez]

I broke my drinking tray a while ago. When I push it in it wont stay in? , it just pulls back itself. How do I take off this part out? I want to put a new one in. I'm very tired looking at it open... it just annoys me alot.

[TypeG]

it's usually the white lever looking thing that gets messed up. i'd try seeing if you can fix it before you buy another. later.

[PrincessKamiez]

it's usually the white lever looking thing that gets messed up. i'd try seeing if you can fix it before you buy another. later.

Oh geez, I never seen that before. I'ma take a look closer.

[Mike1357]

Depending on the center console setup you have the steps might vary slightly. You might have to move your seat forward or backwards (depending on your seating position) but you'll see screws on both sides of your center console. Just take a phillips head and take them out and apply your e-brake so you can remove the first section of the center console. The second section is held in with two more screws in the footwell area. remove those and the second half of the center console should slide out. From there there are a few screws holding the cup holder in place. Remove those and it should be out. Reverse the steps for the installation and you should be good to go.

[PrincessKamiez]

Oh crap now I remember I seen that white thingy came out after the tray broke. It has gears on it, wow it cost alot for a new one.

[PrincessKamiez]

Depending on the center console setup you have the steps might vary slightly. You might have to move your seat forward or backwards (depending on your seating position) but you'll see screws on both sides of your center console. Just take a phillips head and take them out and apply your e-brake so you can remove the first section of the center console. The second section is held in with two more screws in the footwell area. remove those and the second half of the center console should slide out. From there there are a few screws holding the cup holder in place. Remove those and it should be out. Reverse the steps for the installation and you should be good to go.

Thanks for the info. I'll keep in mind .

[DJ metadelic]

Nah, you'll be fine Junkyard FTW!

[PrincessKamiez]

Nah, you'll be fine Junkyard FTW!

Junkyard is so filthy & dirty. I wish junkyard was cleaner for my hands could touch.

[DJ metadelic]

Make one of the jy d00ds pull one. If it's a self pick&pull type deal, it's not hard it's just pull out the ashtray and two philips head screws hold the tray in place if I remember correctly.

[PrincessKamiez]

Make one of the jy d00ds pull one. If it's a self pick&pull type deal, it's not hard it's just pull out the ashtray and two philips head screws hold the tray in place if I remember correctly.

Thanks for the help. I hope there's full service at my local junkyard .

[Nurega]

wear mechanics gloves? I'm a little obsessive-compulsive, but junkyards are tolerable if you're in the right gear. The smell of car death is the only thing that bothers me there nowadays.

[PrincessKamiez]

wear mechanics gloves? I'm a little obsessive-compulsive, but junkyards are tolerable if you're in the right gear. The smell of car death is the only thing that bothers me there nowadays.

Do junkyard smell like oak pine? my friend told me smell like christmas trees.

[Nurega]

Do junkyard smell like oak pine? my friend told me smell like christmas trees.

hmm I can't really describe what 'car death' smells like. Cars with deployed airbags smell like sulfur residue, kinda ashy. Other than that, when cars are crushed, all that dust and particles have to go somewhere. Since you're in the direct vicinity, you smell it.

[PrincessKamiez]

hmm I can't really describe what 'car death' smells like. Cars with deployed airbags smell like sulfur residue, kinda ashy. Other than that, when cars are crushed, all that dust and particles have to go somewhere. Since you're in the direct vicinity, you smell it.

Thats cool, well I got my drinking tray fix today. I ask my dad to pick up the part at the junkyard near my house. The whole thing cost couple of dollars. Lucky I didn't break any else.

[CustomLowz]

In my Beater (92 LX) The thing was broken to the point where it wouldnt retract on its own. The mechanism was taken out, so you have to manually pull the cup holder out, and then push it back in.