90-91 and 92-93 Headlights

[Smoken_ducky7]

its all in the glass not the head light its self

[blizzard335]

its all in the glass not the head light its self

9091 and 9293 have different casper shields..

[HybridKyle]

Not directly side by side but you can see the differences here...

[Gotz Cb7]

I own a 91, and I just installed 1 piece projectors from a 93, and they fit with no problem. If there is a difference, it's very tiny. I didn't think they'd work after reading stuff about the differences and such, but I had no problem at all. Everything directly bolted in, except for the driver side corner. I tightened it too tight and broke the bolt. =(

[Clean_4th gen]

I own a 91, and I just installed 1 piece projectors from a 93, and they fit with no problem. If there is a difference, it's very tiny. I didn't think they'd work after reading stuff about the differences and such, but I had no problem at all. Everything directly bolted in, except for the driver side corner. I tightened it too tight and broke the bolt. =(

There's no problem having a 90-91 bumper with 92-93 headlights...the problem is having a 92-93 bumper with 90-91 headlights, it makes a gap between the headlights and the bumper

[Juan4DCB7]

There's no problem having a 90-91 bumper with 92-93 headlights...the problem is having a 92-93 bumper with 90-91 headlights, it makes a gap between the headlights and the bumper

ahh, that explains why there is a gap between my bumper and headlights.
i have always figured that the gap was due to the head lighhts, because the bumper looks straight.

i was also going to try and tighten all of the bolts/screws that hold the front bumper together right now.

thank you search button!!

[Clean_4th gen]

ahh, that explains why there is a gap between my bumper and headlights.
i have always figured that the gap was due to the head lighhts, because the bumper looks straight.

i was also going to try and tighten all of the bolts/screws that hold the front bumper together right now.

thank you search button!!

No problem I'm planning on doing the '93 convertion but I need to find all the parts off a '93 first because if I do half and half than I'll have the gap between my bumper and headlights

[Juan4DCB7]

No problem I'm planning on doing the '93 convertion but I need to find all the parts off a '93 first because if I do half and half than I'll have the gap between my bumper and headlights

just go to a junk yard and get all of the pieces that u need, they will be way cheaper than anywhere else.

[Clean_4th gen]

just go to a junk yard and get all of the pieces that u need, they will be way cheaper than anywhere else.

I'm taking my time because I dont wanna be mixed matched...I want it all white

[slEEpy_aL]

wanna send me your old turn signals because for my passenger side one the clip broke and is being held together with superglue and sticky tack

[Clean_4th gen]

wanna send me your old turn signals because for my passenger side one the clip broke and is being held together with superglue and sticky tack

I would but I'm planning a DIY on them...I have both clears and OEM but I'm planning a DIY on the OEM...