Preventing Front bumper "sag"

[HappyGilmore]

My front bumper seems to not meet up with the headlights properly, it looks like its hanging down further than it should what can I do to fix this?

[zack_odom]

Check to make sure all the clips are still there,
if not replace them....

[HappyGilmore]

Where would i go to get replacements? I know not all of them are there

[DImages56]

replacements can be found at honda, junkyard, sometimes you can find a suitable replacement at a local auto store.

[lost_accord]

I held the bumper where it's supposed to be and shot some 1 1/2" self-tapping sheet metal screws into it. It will never sag due to broken plastic clips again. The grille hides the row of screws across the top.

[93SM4_CB7]

My Bumper needed some replacement Clips . took a ride over to Auto zone and found some GM Plastic Clips and Did the job

[Shadow1]

pics help out a whole lot.

[noobcake]

yeah chances are you just didnt have somone else pull up on it while you tightened the bolts.

try that before you go buying things

[C91BLX7]

yeah chances are you just didnt have somone else pull up on it while you tightened the bolts.

try that before you go buying things

Yeah, What I do is I use a really long extension on the lower 12mm bolts and pry up on the bumper while tightening them.

[akaja]

Clip is gone or doesn't slide in right.

[Playa128]

Honda would have replacement clips their probaly like 20 cents each...or you can use zipties lol

[vitaminaccrd]

Will zipties work? Never tries it before.

[kouzie]

My driver side chip off a little so I used ziptie....Work great..

[cb75821]

zip ties will work, but i would prefer clips....

[JDM white cb7]

My Bumper needed some replacement Clips . took a ride over to Auto zone and found some GM Plastic Clips and Did the job

Looking good. Feeling tha arcadia green and the front end.