CF4 front end conversion

[carps_accord]

where can i find these?...any replicas?, is it hard to put in?..i have experience with body so it wont be a problem im just curious
any advice is great thanks

[cb4_honda]

check ebay there is a cf4 front cut ..

[blizzard335]

you want your car to look like this:

[wagonkid]

how did he get the fenders to match up and the hood to fit

[blizzard335]

how did he get the fenders to match up and the hood to fit

Malaysian Magic

more on this car here: (pardon to the OP if this is considered as thread jacking)
http://www.cb7tuner.com/vbb/showthread.php?t=109069

[slick]

how did he get the fenders to match up and the hood to fit

cut the cf4 and cb fender. cut the cb a little after the headlight in the tire arch to retain the stock moldings. and then cut the cf4 in the same place and weld together

[carps_accord]

that front end is hella tight, so what has to be cut off my CB the front fenders?

[Dr.x]

are those CB front frame mounts? or CF4?

[93a-lude]

thats insane!!!

[blizzard335]

are those CB front frame mounts? or CF4?

CF4. if not, the CF4 headlights wont fit

[Dr.x]

So to do this ... you need to weld the cf4 front frame to the cb frame.. weld a cf4 cb7 hood and same for fenders?

[blizzard335]

So to do this ... you need to weld the cf4 front frame to the cb frame.. weld a cf4 cb7 hood and same for fenders?

well, from what the owner told me,

most of the CF4 parts were grafted to the CB3 parts;ie the fenders were joined (the front part is CF4, the part aft of the wheel is CB to retain the mouldings)

since the CF4 and CB3 are identical in width, the hood pretty much lined up.

The headlight brackets are taken from the CF4 so that the lights and bumpers will fit.

underneath, its pretty much SM4.

[p1CB7]

That is just bada$$!!!!!! Looks like a totally different car..

[smatt_mith]

I love it!! It just sounds like a shit ton of work and time...not only that you have to have all the parts first.

[kouzie]

headlight really remind me of type R..