So.Cal Mechanics Thread

[UrDoneSRH]

turn signal relays are only a few bucks at autozone. they are usually in the fuse panel. ive never looked on a cb.

and as far as the swtch for the trunk i will look on mine and see if i can figure it out.

[GHOST 2.2]

turn signal relays are only a few bucks at autozone. they are usually in the fuse panel. ive never looked on a cb.

and as far as the swtch for the trunk i will look on mine and see if i can figure it out.

i know where it is. i have a modified one. its a brown relay. thanks though bro. i think im just gonna go to a pick a part and 5 finger discount some relays and turn signal flashers.

[ikayto]

if it fits in your pocket, it's fair game :P

That's how I got another VSS, accord emblems, courtesy lights, and etc lol.

[UrDoneSRH]

haha. great im glad to be of any kinda help.

anyone got the wiring i asked about for the iab's? i want to double check to make sure ive got it hooked up correct. im going to get my car smogged and im trying to get rid of the cel's. one goes away when i disconnect the wires i have hooked up to constant and my ecu. its code 13 barometric pressure.

im also throwing code 10 iat sensor, i think that it being bad could have something to do with code 13, but im going to mess with it tonight or tomorrow morning.

[jhondayaaj]

well, your iat sensor is on the side of the intake manifold. that should be hooked up.

Secondary Intake Solenoid: Pin A17 (Connect Black/Yellow wire on solenoid to switched ignition, the other to pin A17)
refer to the swap faq. there you will find the info. I'll go search on about the baro sensor. I think the baro sensor is in your ecu too.

[jhondayaaj]

well, all the troubleshooting procedure say's is that if the mil is still on, then you got a bad ecu.

[UrDoneSRH]

ya i know where it is, i alread changed it out with a spare one i had... didnt fix the problem so i ordered a new one from auto zone... but i havent seen it yet because my roomate picked it up and cant remember where he put it. so once he finds it ill put it on... if it will work.

ill check my wiring when i change the sensor.

[CB7=91]

yeah i wanted to know what are some good lowering springs that ride smooth and that are not to expensive i wanted to get tein lowering springs but i want to see what else is out there

[ikayto]

if you want a smooth ride, then you'll need some aftermarket shocks to go with them, other wise the ride will be bouncier.

ask justin, he has tein's on stock.

[jhondayaaj]

I've got h&r and they ride smooth.

[Blk EX Coupe]

Neuspeed race was smooth.

[CB7=91]

how much are the neuspeed and whats the ride hight on them

[Blk EX Coupe]

150 new I think, and they are about 90-100 used. They drop like 2.2" I think, but match it with a good pair of shocks or at least a new set.

[CB7=91]

what are some good shocks to go with does springs

[Blk EX Coupe]

what are some good shocks to go with does springs

I want to say koni yellows since they sell them in a package for $600, but any new set of shocks would be good. I use to have kyb gr-2, but a lot of people have them matched with tokico blues.

Stock with 195/60/15 tires


Dropped: (sadly this is the only picture I have of my car dropped on stock wheels with 195/60/15 tires)




*edit* I just noticed I don't have a front plate in the second picture, and I remember both those pictures being taken on the same morning.