Announcement

Collapse
No announcement yet.

Need Help in Boise Area

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    There won't be an issue, i know everyone there man.
    Originally posted by Mishakol129
    Do not disrespect my intelligence. I am the smartest person I know : )

    Comment


      #17
      OK, should be ready to go.
      '93 H22A 5SPD SE - MRT - DIY-Turbo Sizing

      Comment


        #18
        If i have any issues, I'll call you. I should be able to go back over tomorrow, same time.
        Originally posted by Mishakol129
        Do not disrespect my intelligence. I am the smartest person I know : )

        Comment


          #19
          Another update. Went over again today to install the new wires and injector O-rings. I pulled all the injectors and saw this:



          After a little cleaning:



          Put them back together, no leaks. Then I started the car and went for a drive to Autozone to read and clear the codes. After I cleared them and started the car, they came right back...ffffuuuu So I went back to his mom's place and decided to check out the coil. First I checked cylinder #1, because the CEL was specifically a misfire in cylinder#1. I pull cylinder #1 plug while it's running....no change in idle and no spark. So I move to testing the coil, COMPLETELY out of spec. The car idles like it wants to die, and it's a sluggish turd. So new coil it is.

          I plan to go over again tomorrow or Thursday and install the new coil, updates to follow.
          Last edited by dj_ender; 03-27-2013, 12:09 AM.
          Originally posted by Mishakol129
          Do not disrespect my intelligence. I am the smartest person I know : )

          Comment


            #20
            Thanks man. Does she come out at all? She is generally as hospitable as she can be be.
            '93 H22A 5SPD SE - MRT - DIY-Turbo Sizing

            Comment


              #21
              Originally posted by domesticated View Post
              Thanks man. Does she come out at all? She is generally as hospitable as she can be be.
              Yeah she came out a bit, offered to help if I needed it. I also found and fixed a major power steering leak, stupid hose had a hole in it under the clamp. No problem man, when you coming down to Boise again? I'm thirsty!
              Originally posted by Mishakol129
              Do not disrespect my intelligence. I am the smartest person I know : )

              Comment


                #22
                Originally posted by dj_ender View Post
                Yeah she came out a bit, offered to help if I needed it. I also found and fixed a major power steering leak, stupid hose had a hole in it under the clamp. No problem man, when you coming down to Boise again? I'm thirsty!
                Possible May. It's 2200 miles to Detroit going the north route, 2400 miles if I go through Boise. Well see. If I get my stipend from Chrysler earlier I'll stop by for a weekend.
                '93 H22A 5SPD SE - MRT - DIY-Turbo Sizing

                Comment


                  #23
                  Sounds good mang, let me know. Let me know when you order the coil and where. Tomorrow might work out for me to go over.
                  Originally posted by Mishakol129
                  Do not disrespect my intelligence. I am the smartest person I know : )

                  Comment


                    #24
                    Just ordered it from same place. I'll call customer service in the morning.
                    '93 H22A 5SPD SE - MRT - DIY-Turbo Sizing

                    Comment


                      #25
                      Sounds good.
                      Originally posted by Mishakol129
                      Do not disrespect my intelligence. I am the smartest person I know : )

                      Comment


                        #26
                        A final update for those interested: Last week I went over and installed a new coil and new injector seals, 2 of the codes went away, but the cylinder 1 misfire remained. Upon further inspection I saw that part of the gasket around cylinder 1 was missing.

                        Today I went over and installed the new gasket, this is what I saw:



                        After I installed the gasket and fired the car up, the idle was instantly better, but still had a CEL. So I ran the car down to AutoZone and cleared the codes, no codes after that and the car is running fine.
                        Originally posted by Mishakol129
                        Do not disrespect my intelligence. I am the smartest person I know : )

                        Comment


                          #27
                          I don't know how to repay you!
                          '93 H22A 5SPD SE - MRT - DIY-Turbo Sizing

                          Comment


                            #28
                            Lots and lots of dank beer.
                            Originally posted by Mishakol129
                            Do not disrespect my intelligence. I am the smartest person I know : )

                            Comment

                            Working...
                            X