If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
HC @ 25mph = 251 .. max=91, GP=241
CO @ 25mph = 2.18 .. max=0.62, GP=2.12
NO @ 15mph = 3155 .. max=791, GP=1992
my Ignition Timing is 11 BTDC .. and should be at 15
I went to see Jei and he told me i might need to get smogged with a p13 installed. So that's the reason i'm asking for one. I'm going to clean out the EGR's and maybe replace my my Cat(for good measure) Then take it to Jei to get my Timing fixed, and to see how it runs.
-:¦:-
Originally posted by wed3k
i rep cb7tuner all day, everyday. people say, "fuck y0 honda." and i say, "bitch, please."
HC @ 25mph = 251 .. max=91, GP=241
CO @ 25mph = 2.18 .. max=0.62, GP=2.12
NO @ 15mph = 3155 .. max=791, GP=1992
my Ignition Timing is 11 BTDC .. and should be at 15
I went to see Jei and he told me i might need to get smogged with a p13 installed. So that's the reason i'm asking for one. I'm going to clean out the EGR's and maybe replace my my Cat(for good measure) Then take it to Jei to get my Timing fixed, and to see how it runs.
do the diy wes has on the egr, damn timing is way off. maybe do a tune up too while your at it
HC @ 25mph = 251 .. max=91, GP=241
CO @ 25mph = 2.18 .. max=0.62, GP=2.12
NO @ 15mph = 3155 .. max=791, GP=1992
my Ignition Timing is 11 BTDC .. and should be at 15
I went to see Jei and he told me i might need to get smogged with a p13 installed. So that's the reason i'm asking for one. I'm going to clean out the EGR's and maybe replace my my Cat(for good measure) Then take it to Jei to get my Timing fixed, and to see how it runs.
Jei from Blacktrax? You need a usdm p13. Are you JDM or USDM H-series?
HC @ 25mph = 251 .. max=91, GP=241
CO @ 25mph = 2.18 .. max=0.62, GP=2.12
NO @ 15mph = 3155 .. max=791, GP=1992
my Ignition Timing is 11 BTDC .. and should be at 15
I went to see Jei and he told me i might need to get smogged with a p13 installed. So that's the reason i'm asking for one. I'm going to clean out the EGR's and maybe replace my my Cat(for good measure) Then take it to Jei to get my Timing fixed, and to see how it runs.
also all that carbon coming out of your exhaust probably covered the shit out of the pistons and the valves which retain a lot of heat.
I <3 G60.
0.5mm Oversized Stainless valves and bronze guides available. Pm me please.
Comment