Nor*Cal what did you do to your car recently?

[BB6-SH]

Got a BT shift knob

[H23 Lude]

here's my clutch wont get installed until i fix my manifold issue. Its full kevlar unsprung 6 puck.

[wed3k]

made 128whp, thinking it has to do with the intake mainfold so im adding the spacers to see if changes anything. Right now i have the plenum right on the runners so im thinking that's the problem. I picked up my clutch will post pics soon

Edit:
Forgot to mention did a compression test and it was between 195-200 on all 4 cylinders.

that's wierd, isnt that what modded f22 makes? lol

[BB6-SH]

that's wierd, isnt that what modded f22 makes? lol

His car was reading vacuum at WOT which is really weird.

[H23 Lude]

that's wierd, isnt that what modded f22 makes?
lol

I lost 24whp from the last time dynoed, im gonna install the spacers and datalog it and see if still reading vacuum at wot.

[PIMPCORD]

Getting new tires. The front ones are showing internal nerves.

get 215/55/16 , since roads in Santa Rosa are ghey. You need all teh cushion you can get.

[PIMPCORD]

It will rub with 55. 45 would be ideal but tires are like $120+ each.
I went to 205/50/16 instead. It's good to have the stable steering back. Those old ones I had are done for and not giving me good steering.

I got Yokohama YK-520 tires.

Good choice on those. Where did you get them? Hopefully Americas Tire because they have an instant $40 rebate.

[wed3k]

tires-easy had 205/45/16 at 48 bucks a pop. im going to sport that size on my lime green enkei Rp01.

[PIMPCORD]

They have the Ecsta at $42.90 right now. My next set will come from there.

[wed3k]

from my iphone. going to do a complete tear down in it which is perfect because im learning differentials.

[cali-racer]

^
oohhhh, pretty!

[H23 Lude]

Installed the two blacktrax spacers, and test drove the car. Data log shows the vacuum where it should be now and the car feels strong again but only way to tell if their is an improvement is the dyno. Oh wes the block off plate fit perfect.

[samrjr0044]

Picked up sun roof visor at pnp.

[ofr]

ordered megan racing rear lower control arm and toe arm.

[BB6-SH]

Getting a New Custom Y-Pipe from BT and will have them make me a new gasket since I couldn't get the header apart, header uses Hex bolts I don't have the correct Hex socket.