Nor*Cal what did you do to your car recently?

[Warudakumi]

Okay i just got back from tuning, managed to hit 185whp and 146wtq.
Now i need to figure out why there is a dip at around 3.5k to 4k, also i need to see if i can get my hands on another Vtec solenoid. It kept going in and out of vtec causing dips in my power band. I need to get that fixed and get tuned again.

Thats alot better. That is pretty weird on the dipping tho.

I had a issue earlier last week with my Neptune system. I downgraded the firmware to a older stable firmware on my Tunerview and that seemed to solve the problem. The weird thing that appeared on my Tunerview was garbage numbers and glitched pixels when my car took a shit in Vallejo. For whatever reason I guess it was conflicting with the ECU itself and giving me weird o2 readings that were either sky high (24.4) then garbage on my tunerview. I thought it was my wideband that failed because my check engine light came on and my car went into limp mode. 2 o2 sensors later that wasn't the case....and after many test runs (almost didn't make it from dixon it all boiled down to the Tunerview conflicting. I talked to Jei and he said it could be my map wasn't uploaded fully (I changed my 2-step) but I told him what I did as far as the steps I did and that was ok. I almost was about to let my car sit and give my ecu to blacktrax to see if it was fried but it turned out to be the software on the Tunerview itself was buggy to begin with. It was weird since the 1st day when Jei couldn't get it to connect and talk to my ECU.

All is well now tho!!!

Today I flushed my transmission fluid for some Royal Purple. My transmission shifts and goes into gear like buttah now

[wed3k]

was talking to ron about the neptune setup, im interested because it is a bit cheaper. i need to contact MRX and see how many p06's he has, im in need of two.

[H23 Lude]

was talking to ron about the neptune setup, im interested because it is a bit cheaper. i need to contact MRX and see how many p06's he has, im in need of two.

heres the link so you can compare to the s300's features.
http://www.hrtuning.com/pages/category/neptune-rtp

[wed3k]

i accidently ordered one and not two rear lower control arm bushings.

need it for the DD, the project will still get spherical's.

[BB6-SH]

One of my cv boots opened up and flung grease everywhere. Time to replace both axles.

[wed3k]

One of my cv boots opened up and flung grease everywhere. Time to replace both axles.

DSS

new wheel cylinder, drum shoes and polyurethane bushings on their way.

[BB6-SH]

DSS

new wheel cylinder, drum shoes and polyurethane bushings on their way.

I wish lol, i don't have the power to put those things to the test. First i got find a place that carries remanufactured sh axles. I need to figure out my vtec issue too.

[BB6-SH]

i think i may have fixed my vtec issue, gonna schedule an appointment again. Maybe 190whp this time, or yet better midrange. Add the cut out im a step closer towards reaching 200whp.

[BB6-SH]

i think i may have fixed my vtec issue, gonna schedule an appointment again. Maybe 190whp this time, or yet better midrange. Add the cut out im a step closer towards reaching 200whp.

Im going wednesday again.

Gonna setup my launch control, gotta see what rpm to set it at.

[ExplodingCake]

I got oil on my spark plugs , gives me unexpected bogging. Gotta fix that soon.

[wed3k]

irratic idle when warming up. replaced FITV and seems good so far.

[Cb7GHOST]

wax

[accord=inspire?]

i used a lot of money recently

i bought
led white parking lights-$3
led white license plate lights -$15
led white light for interior dome and glove box- $10
XX hyper yellow lights for high beam-$40
auto shift cover from cb95spd-$55
2 silver HOA emblems- $25
Blizgrill-$110

they havent got to me yet...it is shipping

[jdm_inspired]

wax

oOo nice wheels in the sig.

[TheNextAZN]

wax

whoow same here

.. the danyo 6 step clean-up

1: wash
2: paint cleaner/clear coat scrubber
3: clay bar
4: polish, with my new orbital buffer >_<
5: Wax
6: Detail: windows, wheels, mouldings, lip, exhaust
. . i finished polishing.. just need to wax, tomorrow after school step 5 will be done.. lol