Good mechanic shop in Queens area?

[i97supratti]

Anyone know of a good mechanic shop in the Queens area? I have a lot of big repairs I need to get done before June. I got a summer job near all the way upstate and I don't think my CB can make it in the current state. Here's the repairs I'm looking to get done:

-New timing belt, balance belt, water pump, tensioners, cam seal, fronk crank seal, and balance shaft seal w/ retainer
-New clutch, flywheel, clutch slave and master cylinder
-Either rebuild my current grinding transmission, replace with a reman. one, or with a good condition used one
-Install new wheel bearings, hub, rotors, and pads (I have all the parts already to do the ROH conversion)

I have the Rotor over hub parts already. I'll be purchasing the clutch parts from clutchcityonline.com and the timing belt kit from ebay off an OEM kit seller. I'll be paying for labor and the reman./used/rebuilt tranny. Anyone know of a good place that does decent work? I'd do this but I work 7 days a week

Or if not, anyone have any idea how much all this would run me?

[h22sparkle]

Anyone know of a good mechanic shop in the Queens area? I have a lot of big repairs I need to get done before June. I got a summer job near all the way upstate and I don't think my CB can make it in the current state. Here's the repairs I'm looking to get done:

-New timing belt, balance belt, water pump, tensioners, cam seal, fronk crank seal, and balance shaft seal w/ retainer
-New clutch, flywheel, clutch slave and master cylinder
-Either rebuild my current grinding transmission, replace with a reman. one, or with a good condition used one
-Install new wheel bearings, hub, rotors, and pads (I have all the parts already to do the ROH conversion)

I have the Rotor over hub parts already. I'll be purchasing the clutch parts from clutchcityonline.com and the timing belt kit from ebay off an OEM kit seller. I'll be paying for labor and the reman./used/rebuilt tranny. Anyone know of a good place that does decent work? I'd do this but I work 7 days a week

Or if not, anyone have any idea how much all this would run me?

just as much if you was to just get a swap and replace the rotors yourself./

[bruno8747]

I can help u out with the t-belt story....i can source you a tranny also. LMK

[h22sparkle]

why not buy my clutch and flywheel you can even come through and inspect it if you want. And im selling a lsd f22 tranny and later on buy my turbokit.

[i97supratti]

I'll turn this into my own rate machanics in NYC thread. I just paid $260 to replace my clutch and flywheel, I provided all the parts. The guy guaranteed me that if I changed the clutch and flywheel the tranny grinding would stop, but it still hasn't. He also said it's fix the "helicopter" sound coming from the tranny, but it didn't. Douchbag. Golden Eagle Auto Repairs in Queens FTL

Sparkle, I'll hit you up for that tranny if it'll run fine on a NA stock F22 and if you can help with the labor

[trcsbrian]

Check the junkyards near Shea Stadium. Ask for a guy named "El Tio." His real name is Herman. He's the best mechanic I've ever seen and he charges way less than any other mechanic. He redid my whole front suspension basically. Brake discs, both axles, both control arms, both lower balljoints, both front bushings, and i think im missing something else. 700$ all parts included. He'll give you the quotes for free too.

[i97supratti]

Check the junkyards near Shea Stadium. Ask for a guy named "El Tio." His real name is Herman. He's the best mechanic I've ever seen and he charges way less than any other mechanic. He redid my whole front suspension basically. Brake discs, both axles, both control arms, both lower balljoints, both front bushings, and i think im missing something else. 700$ all parts included. He'll give you the quotes for free too.

I'll check him out, he does transmission work also?


Anyone have any reviews on the AAMCO in Queens Village? I think I'll head there if anything for a new tranny.

[trcsbrian]

I dont know if he does transmission work but theres 3 mechanics in that one shop, if none know how to work a tranny, they're direct you to another shop in the junkyard. Thats how it works. Theres people standing out on the road flagging people down and asking them what they need and they direct you what shop to go to. Thats how they help eachother. But still, just ask for El Tio, and everyone in the junkyards know who that is. He's the best.

[T3aM 83rD]

AAMCO might charge alot, I know they did a transmission job for my cousins 6th gen v6 accord. I forgot what he told me that he paid but I remember that it was alot.

There is a transmission place on Liberty ave around where the junkyards are. I might have there card at home, its across the street from this junkyard called A1000 or A2000 or something like that. Should be like 150th street or something in that area. They changed the transmission on my previous cb7. I dealt with the junkyard, they charged me $500 for the tranny installed. After I paid they sent me to that transmission shop to pick up my car.

[T3aM 83rD]

the name of the tranny shop is Welbuilt Transmissions or something like that