an event in ohio

[HondaFan81]

Alright, Dave just told me that the shop is open from 7:30 am - 5:30 pm March 31 (Saturday) and will be working on any cars that come in that day peformance related/or not. I want to catch some of the work in action, walk around the shop, etc.

I'm planning on being there by 1 pm. I'm leaving my home (Tecumseh, MI) at 10 am, March 31 (Saturday). My general route will be US-23 south to I-75 south, then to US-33 east or south into Marysville, OH.

If possible I'd like to meet up with anyone coming to this meet on the way down that falls into my route to caravan part of the way. Here are some locations and approximate times I will be passing by them.

Please PM, email (aranafrancisco@hotmail.com) or call me if you're interested in doing this. I'm not planning on going out of my general route, so don't ask please.

BE AT ANY OF THESE LOCATIONS BY THIS TIME & CALL MY CELL ON ARRIVAL (you'll be approx. 15 minutes early)

** Check your email for my cell phone number & bring walkie-talkies if you have them!! **

1) I-75 south >> Bowling Green, OH @ 10:45 AM EST

http://www.mapquest.com/maps/map.adp...te=OH&zipcode=

2) I-75 south >> Findlay, OH @ 11:05 AM EST

http://www.mapquest.com/maps/map.adp...te=oh&zipcode=

3) I-75 south >> Lima, OH @ 11:30 AM EST

http://www.mapquest.com/maps/map.adp...3d&ambiguity=1

4) US-33 east or south >> St. Johns, OH @ 11:50 AM EST

http://www.mapquest.com/maps/map.adp...wX&ambiguity=1

[That1guyN8]

Count me in.

[HondaFan81]

O shit son, I was JUST ABOUT TO POST something about cb7tuners in Ohio meeting up...sometime in the summer

hells yeah!...you said the 31st...what time will this be starting...in the AM???

If you come to this meet, then you can hang out with our Midwest Car Club crew (MWCC) and if you're interested you can join since your in our region.

BTW people, I'm a very busy person too, but you all should get in the habit of atleast checking your email. It's rare, no matter how busy I am that I don't atleast check mine once a day. I don't get responses from everyone and have to hound people down...wtf?!?!

[HondaFan81]

People coming list on first post...updated

[HondaFan81]

I think this will be a fun meet and especially for Honda freaks like myself and most/if not all you guys. I look foward to meeting new faces and you 'ol skool guys again. First meet of this year!

[bigblue]

lol i missed going to it last year since i was in indy for skool, but from what i've heard around the shop its awesum, specially in the fact all the people that are there have the same passion for honda's. also for the record so far there hasnt been any "old school" hondas show up as a grou so we will be the first

[HondaFan81]

Bump...meet is coming up soon!

[That1guyN8]

Anybody going to the meet interested in a f22a 272 camshaft regrind?

[HondaFan81]

Got some more peeps for this meet. Updated front page.

[bigblue]

awesum!! and also i dont know what is going on for food during the day. I was told it was going to be cateredd but they havent said much, so just in case i ask to bring sum extra money. around the dealership we have applebees, starbucks, mc D's, BK and down the road a block or 2 is a lot of other stuff.

[HondaFan81]

Friday evening Canadian Mike is coming to my house to chill. We both leaving 10am Saturday to meet others in Dundee, MI by 10:15am (exit # 17 off US-23 @ Shell gas station). The people we're meeting there are Tim (Civic hatch), Gary and Rushdee. From there we caravan down I-75 south to US-33 east/south to Marysville, OH.

We plan to meet up with David in:

4) US-33 east or south >> St. Johns, OH @ 11:50 AM EST

http://www.mapquest.com/maps/map.adp...wX&ambiguity=1


So we should be rolling about 6 deep on my end. We'll meet the rest of you there.

[91blk4thgen]

YES Awesome!

I am really looking forward to being in Marysville, OH for this meet.

Awe man I can't wait!

Folks, I have a complete JDM F22B head that neads and intake end

bearing cap as well as a possible rebuild for sale.

I also have the T-belt from an H23 included and that's all for the head swap.

From what I was told, is that the valve seals maybe leaking and could cause

a little smoke when it's installed on the car again based on what the previous

owner told me. So if anyone is interested, let me know and I can bring it over

to the meet so no shipping cost is required.

I will post pics later on the head and T-Belt later on this evening.

Nate: I maybe interested on that Delta 272 cam! so please bring it with you

and we will talk about it then.

Aight, peace out and will see yas later.

-Mike from Canada!

[91blk4thgen]

OK here are the pics of the JDM DOHC F22B Head that I mentioned for sale to be brought to the Ohio meet ONLY. If no ones interested before the meet then after the meet I will ship it out to whomever buys it. I paid just over $200US for it plus duty fees when I declared it over the border.

Pic number 1 of the VALVE COVER



Pic number 2 of the BOTTOM OF THE HEAD. Has to be cleaned obviously
but no damage to the valves and the head is straight.



Pic number 3 of the INTAKE SIDE. Notice the intake cam bearing end cap is missing. Surly an intake end bearing cap off the F22A will bolt in.



Pic number 4 of the GEARS.



Pic number 5 of the EXHAUST SIDE.



Pic number 6 of where the DIZZY goes in, etc. There is visual where weld has been applied here.



I mentioned that I was going to take a picture of the timing belt

but I'm just going to throw it in for free after paying $35US shipped for it.

By observation, it looks fine to me and that's all I know about it, like

I said it's a freebee.

Any questions, concerns, comments (good and bad) are welcome.

I will try my best to answer them.

We shall see most of you at the meet.

Later

[bigblue]

AWESUM!! glad to c we got more people coming!! woot!!

[HondaFan81]

Can't wait man. Looking forward to this and seeing you guys again, good start to a new year eh?