*mid-west* B*s Thread

[vietkid_2006]

$500, fuck that. I'm getting mine from tiger for $390. My engine, transmission and shipping cost to the 49509 is only $630 total. Not to mention the engine I'm getting isn't blown. Obviously they want way too much for it. I wouldn't bother touching it. The springs sound interesting though.

yup everything is fine when that car got sold but the distributor seal went out and that's why they probably junked it. all it needs is a new dizzy.

the springs are nice too.

What's the F20 make for power in comparison to the F22 and H22?

there are 3 types of F20's F20A, F20B, F20C

if the second one i would be running a 1 pc. coilover setup maybe a f&f type 1 or 2 but idk yet.

and dang, run to the yard and get those springs for me lol. ill give u 25 bucks lol.

i'm getting F&F's bish.

uhh i can get them and put them on. or sell them for more then 25 dollars.

[5spd92]

then why dont you get them and put them on mr. i need a drop lol.

just wanted to add, i like this song, http://photos-h.ak.fbcdn.net/photos-...AAAeIUtIM:.mp3

[vietkid_2006]

then why dont you get them and put them on mr. i need a drop lol.

just wanted to add, i like this song, http://photos-h.ak.fbcdn.net/photos-...AAAeIUtIM:.mp3

they'll charge a leg and an arm for the springs probably lol. why couldn't the car be at the JY we went to.?

[5spd92]

oh ic lol well since its winter u can get me in the spring and we will go, jy hunting lol from here to ur place lol. and should of asked lol.

[CB7 Sleeper]

That ain't bad at all.

No, it really isn't. But those numbers aren't what turned me on to this engine, it was the overall design.

F20A

This engine was used in the 1990-1993 CB3 and CB4Honda Accord 2.0Si and Si-T in Japan. And the Honda prelude BB3-BB9 96-01 in Europe.

Specifications

* Bore × Stroke: 85.0 × 88.0 mm
* Displacement: 1997 cc
* Valve Configuration: DOHC, 16 valves
* Compression ratio: 9.5:1
* Max power: 150 hp (112 kW) @ 6100 rpm
* Max torque: 137 ft·lbf (186 Nm) @ 5000 rpm

This engine is very rev happy by design. Just look at how much shorter the piston stroke is compared to that of an F22a. With some camshafts, and a few other mild modifications, this engine will SCREAM! I can't wait to get it all done.

[Ander]

No, it really isn't. But those numbers aren't what turned me on to this engine, it was the overall design.



This engine is very rev happy by design. Just look at how much shorter the piston stroke is compared to that of an F22a. With some camshafts, and a few other mild modifications, this engine will SCREAM! I can't wait to get it all done.

What's red line?

[CB7 Sleeper]

What's red line?

I want to say 7500 stock, but it's capable of more.

[Ander]

I want to say 7500 stock, but it's capable of more.

Holy fuck. That'd be amazing for a N/A build.

[CB7 Sleeper]

Holy fuck. That'd be amazing for a N/A build.

I'm going on the bottle, 75 shot with bisimoto 2.3 nitrous camshafts so the bitch should really rip!

[Ander]

I'm going on the bottle, 75 shot with bisimoto 2.3 nitrous camshafts so the bitch should really rip!

Yeah, it'll be great...as soon as you get some traction

[CB7 Sleeper]

Yeah, it'll be great...as soon as you get some traction

Should be good if I hit the button at the right time. I usually race from a roll anyway, so should be good.

[Ander]

From a roll yeah. Try to race from a dig though and your tires will chirp all night long haha. That'll be on beasty build though, damn!

[kouzie]

what else is there to do to your car?

[CB7 Sleeper]

That's what I thought chump! lol jk

[kouzie]

That's what I thought chump! lol jk

yeah, thats what I thought too..