Originally posted by C91BLX7
Its like 200 miles lol 
-
200 miles? 5hrs? That is freak'n crazy! How about this, I can reduce your time to get here. Here it is: D = 200 mi T = 4-5 hrs, Now, if you increase your rate like, let's say 75 mph, then your time to get here could be about 2 hours and 35 minutes. I mean, how desperate are you???? LOL... -
not that its your guys's resposability but if im gonna make this meet i really need your help with my cb seeing as its down right now all tore apart.. i cant get the lower ball joint nut off and its pissing me off. lets hope the rings in this new block arent fried.
Comment
-
i just map quested it from my house and heres the results.. hah whos driving the farthest.
1204 N E St
Indianola, IA 50125-1118
TO:
2280 Maplewood Dr
Maplewood, MN 55109-2558
Total Estimated Time: 4.0 hours 17 minutes
Total Estimated Distance: 271.89 milesComment
-
Originally posted by Accord_exR
air/power tool? rusty?Comment
-
Originally posted by Accord_exR
hey..Thats not bad..
last year we pick buddy cb around IA/ND..Was almost 6 hours...
three months later sucker sold the cb..piss me off..
Comment
-
To me, it seems like the ball joint bolt is turning inside the socket as you are turning the nut. Am I right or what's ur guess?Originally posted by Accord_exRComment
-
yes that is correct its spinning inside while i spin the nut.. any ideas otherwise im gonna have to take everything apart just to get the axle out.Comment
-
^^ is there anything to hold it while you turn it?
seriously I never took one off myself..
Comment
-
nope i tried holding it lol i even destroyed the boot just so i could hold it and it still wouldnt budge hah so i just took the entire suspension apart now i got go get a whole new arm from the jy oh well the motor is suspended in the air right now ready to pull. damn what a bitch i swear the shit we do for a 15 year old car lol but we all love our cbs... and cd5's (ntcb7).. anyways i would take pics but the digital camera is fucked up right now ill c if i got another one. peace.Comment
-
Originally posted by Accord_exR
cool.......sorry to hear all that .......
but yes we all love our cb...I need to fix mine also..hate the shaking on highway over 65MPH...Comment
-
oh boy, everyone is getting ready for meet
Comment
-
Either way, because the lower ball joint is turning like that, it would probably be wise to replace it anyway. Anyhow, here's what you can try (if you haven't already): Looks like you'll need to apply some pressure on the ball joint. See if you can use a jack to jack up the lower control arm so some pressure can be applied onto the ball joint. Otherwise, if you know that the lower ball joint is still tight, leave it alone and try to take off the upper ball joint instead. Please get back to me.. Good luck!Originally posted by Accord_exRComment
-
Hey Nhia, you guys plan to roll by midway tomorrow? kou told me thatComment
-
-
Comment