Help me out here

[93F22A6]

Ok guys, I'm about to get a new addition to the fam (cars not the other kind ) Anyways it needs some work. . . . and some parts.
List:
1. P13 or another ecu that will run an H, I perfer the P13 so I don't have to get a tune yet
2. Tires 205/40R17 or 215/40R17 will work
3. The big one, suspension. struts and springs
4. Help maybe with the interior. It's maroon

[jimmybean21]

you can run a p28 ecu and get a chipped burned with a stock h22 base map. wit p13 you will have a governor wont be able to go past 115. koni yellow suspension i here is good. i just got my hands on a set of tokico blue struts with sprint springs the member i hear that they are a comfortable ride. my interior is maroon personally i love the only thing i changed was the fronts i put 89 prelude si seats in. good luck...

[93F22A6]

Well If I can't go over 115 then I say no to the P13. This will be my project/ road race car.

[Shadow1]

like jimmy said, go with some Koni yellows and GC coilovers. either that or some Func./Form Type I's or II's. i say I's because they're $630 shipped from weaksause.org. haha.

[93F22A6]

I would perfer the gc and koni's. I just need a stock set up for now until I get the money. This is going to be one hell of a project.

[drummersteve7]

if you want that ecu chipped lemme know,

I just bought a bunch of chipping kits...
p28 is the only way to go!

[93F22A6]

if you want that ecu chipped lemme know,

I just bought a bunch of chipping kits...
p28 is the only way to go!

Oh nvm disregard that pm. I am gonna get an ECU from RLZ up the road.

[drummersteve7]

Oh nvm disregard that pm. I am gonna get an ECU from RLZ up the road.

bummer...just realize you dont need to go the hondata route, but its up to you!

[Shadow1]

bummer...just realize you dont need to go the hondata route, but its up to you!

ill be in white plains, MD in september. i plan on hooking up with Accord_SiR and kamaccord the day i leave. ill be sure to hit you up too. ill be hanging out with the boosted crew

[IBCNYA]

Well If I can't go over 115 then I say no to the P13. This will be my project/ road race car.

Pt6 will take you over 115 and still open the Iabs should you run a H23/F22a6 intake manifold. A chipped P06 with a P72 base map and btec deactivated would give you higher redline, faster top speed and control your IABs as well. Who does your tuning?

Howard will/can get you straight (RLZ)

[93F22A6]

Yeah Howard is going to tune it. I went up there to talk to him and see the shop. Nice guy, they were working on a civic when I got up there. Anyways I'm going to pick up the H tomorrow along with a lot of other parts. The plans change about the car, the ultimatum was if I get it I had to sell the one I have now. So I made a deal with the guy to get the parts off of it.