*****\_____3rd Annual Spring Meet-2010_____/*****

[90-JDMCB7]

but seriously for everything $1300.
but this starts the big time build.
will be setting up the h23 to run 400whp DD.

total investment will be what...4k or more?

[Shadow1]

If you need to ask, you don't need to know.

Ouch!

yeah man. lol. ouch. lol.

but seriously for everything $1300.
but this starts the big time build.
will be setting up the h23 to run 400whp DD.

dag. $1300....shnit.....

[drummersteve7]

$1300 prepares the block.
$600 pistons/rings
$400 connecting rods
$200 bearings and installation(me)
$600 head valves/retainers/springs
$700 head - mild port job, glass bead, fly cut head, 3 angle valve job
$300 injectors
$300 clutch
$700 turbo manifold top mount
$1000 Turbo (?) prob a garrett
$300 Exhaust

Complete $6400, so about $7000. Thats just engine stuff!
Want done by Summer 2011.

then its time for the h22! thats gunna be a bigger and badder setup!!!

[smithboy76908]

nothing that the cops would mistake for something else. ive seen people use hookas for weed. so no. sorry.


when it comes to my meets, i try to keep cop trouble down to a minimum. that also goes for park authorities. both have the right to kick us out if they see anything that would make us look like we're doing anything bad. that means no mouthing off to any of them that show up(DRUMMERSTEVE!!!! lol). if they do show, you are to direct them towards me. i will talk to them.


if you are seen with ANY of the items not allowed or doing acts that are listed on the 1st page that isnt allowed, you be asked to leave. if you choose not to leave i have 2 guys built like linebackers(both members of my car club) who will escort you out of the park. if that doesnt work, the last resort is calling the police.

Ok, gotcha. Just thought I'd ask.

[smithboy76908]

$1300 prepares the block.
$600 pistons/rings
$400 connecting rods
$200 bearings and installation(me)
$600 head valves/retainers/springs
$700 head - mild port job, glass bead, fly cut head, 3 angle valve job
$300 injectors
$300 clutch
$700 turbo manifold top mount
$1000 Turbo (?) prob a garrett
$300 Exhaust

Complete $6400, so about $7000. Thats just engine stuff!
Want done by Summer 2011.

then its time for the h22! thats gunna be a bigger and badder setup!!!

A garret GT3071R would be my suggestion.

[drummersteve7]

very similar, more like the Garrett T3/T67 H.O. Turbo!
close close....but gunna run crazy boost. lookin for 400hp!

[ONEKLEAN91]

bump!!!!

[Shadow1]

bump!!!!

i cant wait man. my car is gonna handle like its on rails and ima be fast as shnit....well not fast as shnit. but ima be quick. lol.

[drummersteve7]

quick? rockin my old a6 engine, we shall see.
hey your rocking the a6 with a p12?

[Joshy]

hey your rocking the a6 with a p12?

p12 is for the a1. no control of the IAB system.

[Shadow1]

quick? rockin my old a6 engine, we shall see.
hey your rocking the a6 with a p12?

for a lil bit.... i felt more of a gain with the p12 on the a6 then i did with the p12 on the a1 or the pt6 on the a6. next year tho, i might have a few mods that will require a chipped ECU. we'll see tho.

[Shadow1]

p12 is for the a1. no control of the IAB system.

doesnt matter about the p12 not being able to control the IABs. i have mine hooked up to a vacuum. they may open up at like 3500 RPMs or at WOT but i dont care. they open. thats all that matters.

[drummersteve7]

for a lil bit.... i felt more of a gain with the p12 on the a6 then i did with the p12 on the a1 or the pt6 on the a6. next year tho, i might have a few mods that will require a chipped ECU. we'll see tho.

damn dude...u need to remove your butterflies, sounds like your next mod should be a double stack with IAB removed.

your actually being robbed of power as we speak!

[Shadow1]

damn dude...u need to remove your butterflies, sounds like your next mod should be a double stack with IAB removed.

your actually being robbed of power as we speak!

nope. im not for taking the IABs out. i take those out, ill lose my bottom end torque that i love so much. plus, im not making much power so its pointless for me to take them out now. i like to feel the jump in power in the middle of the RPM range.

[2lowcb7]

yo T add me to the list. i may have to follow you though. lol