My DRL Issue!!

[Hondaman1990]

Hey guys, i have a 90 accord (canadian made). When i turn the car on my drl come on (low beams only). I did a bit of research on here and found out that low beam drl's was only on the 90 accords and they changed it to high beams drl's on the 91's and up. So my question here is, is it possible to get a drl module from say a 91 or 92 and replace my 90 module? Any feedback would be great guys!

[CB7Nub]

No idea man. I would try searching for answers in a non regional section like "Beginner Appearance" or just "Appearance".

I know there is an answer somewhere there.
I have seen it before.

DRL's go bad on our cars due to the solder joints breaking due to over 20 years of cold and warmth .

[Monza]

Does it look like this?



If so they are all the same from, well mine is a 93 up to 05 civic accord all the same. You can also fix yours by soldering the burnt points, usually about 5 points burn.

[Hondaman1990]

Thanks monza! Ya i was just wondering if i could use a different one. Ill keep an eye out for one

[Monza]

I have 7 or 8 of them in my tool box at work. I could swap you a fixed one for your broken one if you want for say $15. let me know.

[crazymikey]

Not a clue either since I have a 90 as well.

With the 91-93 cars, I always disconnect the DRLs.

[Hondaman1990]

I have 7 or 8 of them in my tool box at work. I could swap you a fixed one for your broken one if you want for say $15. let me know.

Ya mines not broken at all! I just want to run my high beem Drl (91 and up) instead of the one i have, it only runs low beams drl

[sanJ_01]

Never really had drl's! Its come in handy a few times creeping up/away without lights