So Canada, what's new with your car?

[honda_mike]

Just finshed installing my Intersection lights Check out MRT for pics

[RustyBucket]

- Installed "dark" license plate covers to protect the 1980's plates
Front & Back

Every time I've seen an Ontario car with the dark plate covers, I've always thouigh it was to take the 407 for free
They used to be popular in BC when they still did photo radar.

[CB7Nub]

Every time I've seen an Ontario car with the dark plate covers, I've always thouigh it was to take the 407 for free
They used to be popular in BC when they still did photo radar.

Well they are supposed to be dark but you can easily see the plate, I don't want to get pulled over for having really dark plate covers you know?

[90blackcoupe]

Oil change n filter on da cb,

Sold my durango it was killing me on gas, picked up a 2000 honda crv 4wd minty fresh low km sick winter beater

[Jukesbox]

heater core went on my dads car...and pens were the cause of the heater core failure

[sanJ_01]

broke down on the side of the 403, dropped to 0rpm all of sudden on an overpass doing 110 and heard a bang noise under the driver seat before coasting down the hill, waiting to find out whats wrong with it

[CB7Nub]

broke down on the side of the 403, dropped to 0rpm all of sudden on an overpass doing 110 and heard a bang noise under the driver seat before coasting down the hill, waiting to find out whats wrong with it

Exact thing happened to me last year in my CB9. Distributor was gone, your probably looking a new dizzy. Good luck!

[Punkrampant]

Gently used:

Interior door handle
Dome/courtesy light covers
Glove box
A-pillar cover(not installed yet)
93 Ex lip
Altima wheels w. New tires
DIY Grill
Pioneer 6.5" up front
Re-wired the deck. was previously a twist and tape.


Maintenance + :

Rad Cap
T-stat
Oil change
Trans fluid flush
Plugs
P12
Ngk Wires

[sanJ_01]

Exact thing happened to me last year in my CB9. Distributor was gone, your probably looking a new dizzy. Good luck!

Thanks, that's actually exactly what it was...wish i had known earlier so i wouldnt have paid to have it fixed...dizzy looks pretty straight forward to replace

[CB7Nub]

Thanks, that's actually exactly what it was...wish i had known earlier so i wouldnt have paid to have it fixed...dizzy looks pretty straight forward to replace

Yeah it's soooo easy, undo some clips for the wiring, take off the spark plug wires, and do 3 bolts off the head. Done, but I did post it 8 hours later, and I don't think any shop is going to work on it from 2AM to 8AM lol. Maybe closer you 8, but you get my point.

Gently used:

Interior door handle
Dome/courtesy light covers
Glove box
A-pillar cover(not installed yet)
93 Ex lip
Altima wheels w. New tires
DIY Grill
Pioneer 6.5" up front
Re-wired the deck. was previously a twist and tape.


Maintenance + :

Rad Cap
T-stat
Oil change
Trans fluid flush
Plugs
P12
Ngk Wires

Maintenance helps sooo much , how do you like the P12?

[Punkrampant]

Maintenance helps sooo much , how do you like the P12?

I'll let you know when I replace the torque strut and the rear mount

[GearBangnAccord]

got a compustar alarm/starter combo havent installed yet been lazy

[Jukesbox]

thinking about 5 lug so
http://www.cb7tuner.com/vbb/showthre...83#post2904783

[GearBangnAccord]

installed keyless works great just need to trouble shoot the Remote start

[90blackcoupe]

Car wash on the cb, shinnin

Been busy winterizing my new crv(real time 4wd ftw), new breaks all around, rust proof all fluids replaced, inlcuding rear diff dual pump fluid oem honda, also had the windows tinted and interior detailed, almost ready to go.