Let's have a little fun, shall we?
![](http://i38.photobucket.com/albums/e144/af_1132/SonomaRaceway7-9-14Run3_zps074410fa.jpg)
Here's how to play: estimate what my best time is going to be this Saturday, 2/28, at the drag strip. The closest estimate to my best time will get $25 from me via Paypal. This is no joke, if you are the winner, I will PM you asking for your Paypal address so that I can send you $25, corrected for Paypal's lame fees.
Here is what you need to know:
Location: Sonoma Raceway
Current best drag time: 15.716 @ 86.3
Mods at that point in time: SR w/ram air out front light, DC 4-2-1, Magnaflow 2.25", gutted (upholstery, rear seats, panels, climate controls, radio, AC and cruise delete), MT 225/50R15 street radials, Odyssey PC680, prelude shifter.
Current performance oriented mod list:
ENGINE:
F22A1 stock block (305k miles!)
Synchrotech built M2Y4 with Accord 5th, 4.266 FD, and MFactory Helical LSD
P06 ECU with Hondata S300 V3
Setup tuned at Blacktrax Performance
Innovate MTX-L Wideband 02 Sensor
Custom silver painted valve cover
Weapon R ram air velocity stack attachment
H23 plenum and runners and double stacked IAB plates (non-functioning IABs)
AEM 320 lph pump, high flow fuel rail, and FPR
RDX 410cc injectors
H23 60mm throttle body
VC air breather
DC Sports 4-2-1 header with collector/flex pipe
Magnaflow C.A.R.B. catalytic converter
Magnaflow 2.25" cat back exhaust
Bisimoto Level 2 camshaft 0.400" lift
Bisimoto STD valves and valve springs
Exedy Stage 2 Cerametallic 4 puck clutch
ACT Streetlite 12.6lbs flywheel
Odyssey PC 680 with Billet aluminum hold down kit
NGK Iridium IX spark plugs and NGK blue wires
SUSPENSION/WHEELS:
Energy Suspension Hyper F System
Fortune Auto 500 series coilovers with swift springs (12k front and 8k rear)
SPC front and rear camber kits (1.5 deg adjustable)
Filled motor mounts with 80A Polyurethane
Rigid rod-end custom torque mount
Centerline Warrior 15x7 Custom 4-lug wheels
Mickey Thompson Street Radial II 225/50R15
The sad little dynapack dyno sheet:
![](http://i38.photobucket.com/albums/e144/af_1132/ALLEY%20DYNO_zpsxfttkea7.png)
Yes, I need to flow better, but this is the way it is right now.
Good luck estimating, may the best estimator win!
(If this is not allowed, please delete. I don't believe any rules are being broken, but feel free to enlighten if I missed something!)
![](http://i38.photobucket.com/albums/e144/af_1132/SonomaRaceway7-9-14Run3_zps074410fa.jpg)
Here's how to play: estimate what my best time is going to be this Saturday, 2/28, at the drag strip. The closest estimate to my best time will get $25 from me via Paypal. This is no joke, if you are the winner, I will PM you asking for your Paypal address so that I can send you $25, corrected for Paypal's lame fees.
Here is what you need to know:
Location: Sonoma Raceway
Current best drag time: 15.716 @ 86.3
Mods at that point in time: SR w/ram air out front light, DC 4-2-1, Magnaflow 2.25", gutted (upholstery, rear seats, panels, climate controls, radio, AC and cruise delete), MT 225/50R15 street radials, Odyssey PC680, prelude shifter.
Current performance oriented mod list:
ENGINE:
F22A1 stock block (305k miles!)
Synchrotech built M2Y4 with Accord 5th, 4.266 FD, and MFactory Helical LSD
P06 ECU with Hondata S300 V3
Setup tuned at Blacktrax Performance
Innovate MTX-L Wideband 02 Sensor
Custom silver painted valve cover
Weapon R ram air velocity stack attachment
H23 plenum and runners and double stacked IAB plates (non-functioning IABs)
AEM 320 lph pump, high flow fuel rail, and FPR
RDX 410cc injectors
H23 60mm throttle body
VC air breather
DC Sports 4-2-1 header with collector/flex pipe
Magnaflow C.A.R.B. catalytic converter
Magnaflow 2.25" cat back exhaust
Bisimoto Level 2 camshaft 0.400" lift
Bisimoto STD valves and valve springs
Exedy Stage 2 Cerametallic 4 puck clutch
ACT Streetlite 12.6lbs flywheel
Odyssey PC 680 with Billet aluminum hold down kit
NGK Iridium IX spark plugs and NGK blue wires
SUSPENSION/WHEELS:
Energy Suspension Hyper F System
Fortune Auto 500 series coilovers with swift springs (12k front and 8k rear)
SPC front and rear camber kits (1.5 deg adjustable)
Filled motor mounts with 80A Polyurethane
Rigid rod-end custom torque mount
Centerline Warrior 15x7 Custom 4-lug wheels
Mickey Thompson Street Radial II 225/50R15
The sad little dynapack dyno sheet:
![](http://i38.photobucket.com/albums/e144/af_1132/ALLEY%20DYNO_zpsxfttkea7.png)
Yes, I need to flow better, but this is the way it is right now.
Good luck estimating, may the best estimator win!
(If this is not allowed, please delete. I don't believe any rules are being broken, but feel free to enlighten if I missed something!)
Comment