Bisimoto's 2013 Honda Accord SEMA build

[Julio@Bisimoto]

The Bisimoto Accord was a pleasure to put together and was transformed from 100% stock to what you see in the pictures in under a week! The new J-series engine is very stout from the factory and made some great power with the addition of Nitrous Express NX wet kit. Much more will be reviled in the next up and coming weeks

The limited-edition 2013 Honda Accord Coupe with the HFP package (Honda Factory Performance) has been revealed at the 2012 SEMA show alongside a 2013 Accord Coupe tuned by Bisimoto Engineering and the DSO Eyewear/MAD Industries 2013 Accord sedan. View our comprehensive gallery of all three 2013 Honda Accords debuting at the 2012 SEMA show in the gallery at the bottom of this post.


Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring

Bisimoto Engineering has boosted the output of the 2013 Honda Accord Coupe’s V-6 engine from 278 hp to 401 hp with a Nitrous Express (NX) nitrous oxide kit and Bisimoto cat-back exhaust system with Burns Stainless mufflers. The coupe’s suspension has been updated with new coil springs and sway bars while a roll cage has been added to stiffen the chassis. Buddy Club supplies new brake calipers and rotors as well as 19×9.5-inch alloy wheels wrapped in 245/40/19-inch rubber.

2013 Honda Accord Coupe V6 Bisimoto Engineering Grand Touring wheels 1 300x187 imageThe exterior of the Accord Grand Touring concept was designed by Denmatic and features a Gatorwrap exterior body wrap that covers the HFP bodykit. Inside, occupants sit in Bisimotwerks GT3 racing seats.

Here is the full list of modifications to the Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring:

Powertrain Modifications:

Nitrous Express (NX) wet shot chemical supercharger system
NGK Iridium spark plugs
PurOl “Elite Series” Synthetic Motor Oils
Bisimoto Cat-back exhaust system
Burns Stainless mufflers
Bisimoto 360 degree Oil Cap

Chassis/Suspension Modifications:

JNF Chromoly roll cage
Progress coil suspension and sway bar
Buddy Club: P1 Racing II Plus 19×9.5 aluminum wheels, P1 Racing lug nuts, Racing Spec Monoblock Calipers, Racing Spec Brake Rotors
Falken Azenis FK453 245/40ZR-19 tires

Exterior Modifications:

Gatorwrap custom laminated body wrap
Bisimoto: Accord GT Decal Pack kit, Accord GT Ghost Emblem Kit
Denmatic design scheme
HFP body kit side skirts, rear and front fascia kit
Carbon Creations GT Concept 2 Wing

Interior Modifications:

Bisimotowerks: GT3 racing seats, Leather wrapped and hand stitched roll cage, reservoir socks
G&J braided lines


Read more: http://wot.motortrend.com/401-hp-201...#ixzz2AtFeDgNb

[FamousFreak]

Im glad to see Bisi finally decided to build an Accord.

Looks great!!!

[keepinitclean]

Gorgeous, not to burst your bubble or anything, but shouldn't this be in the other automotive thread?

[F20A CB7]

Sweet mercy, how much whp with spray?

[kouzie]

Gorgeous, not to burst your bubble or anything, but shouldn't this be in the other automotive thread?

x2..

[Madpol]

man that is SICK....a bit similar to the colour scheme im slowely doing...all red and black

[F20A CB7]

Sweet mercy, how much whp with spray?

I reread and found my answer.

What's the specs on the bisi exhuast?

[stretch JDM]

Nice ...How much was done to reduce the total weight on this accord ? Those new and previous accords look too heavy IMO. I have not looked up the factory specs just judging upon the size of them.

[Daheavyking]

Bisi + accord= winner!!!!!

[F20A CB7]

^ ain't that the truth!

[Julio@Bisimoto]

Im glad to see Bisi finally decided to build an Accord.

Looks great!!!

Thank you, we decided to finally turn to the dark side

Gorgeous, not to burst your bubble or anything, but shouldn't this be in the other automotive thread?

Thank you for the complement, I guess the thread was moved for me. Thanks mods

Sweet mercy, how much whp with spray?

Spray was around 100 horse power increase and she took it like a champ!

man that is SICK....a bit similar to the colour scheme im slowely doing...all red and black

Wow your car is looking sweet, let me know if there is anything I can do to help you out performance wise.

I reread and found my answer.

What's the specs on the bisi exhuast?

3 inch manderal bend tubing with twin Burns stainless steel mufflers.

Nice ...How much was done to reduce the total weight on this accord ? Those new and previous accords look too heavy IMO. I have not looked up the factory specs just judging upon the size of them.

The new 2013 Accords are a bit on the heavy side... However this build was designed for an aggressive street car, without sacrificing drivability. To reduce rotational mass we used a set of lightweight forged Buddy Club wheels, other than that we focused on handling with Progress suspension coils, rear sway bar and JNF roll bar setup.

Bisi + accord= winner!!!!!

^ ain't that the truth!

Thanks guys

[GhostAccord]

Seriously, all the work Bisi has done to other cars and he ops out for a N2O kit, Burns stainless cat back, and some suspention bolt-ons...... This is what he sent to SEMA...nothing really innovative here. Other than it's parts for a 2013! Guess you might get some nostalgic yuppy fast and the furious wannabes with this one!

Go ahead, say that haters gonna hate! I only voice my opinion!

I'll take the Accord HFP package thanks.....


Would have liked to have seen what was put into the 600hp Elantra put into the Accord. Seems like the Accord was an after thought or just thrown together for shytes and giggles!

[steelbluesleepR]

i realize he only had it for a week, and there is a ton of work done to this thing in that time, but Bisi is a motor builder/tuner, is anything done to the motor other than nitrous and stainless exhaust? is there a set of web cams in there or a pair of pretty stainless headers?

looks great either way, and im sure it drew a lot of traffic and attention to the booth. its great to see that honda considers Bisi to be someone this valuable to their image.

[Julio@Bisimoto]

Thank you for your opinion Mr. Ghost.

We where honored that Corporate Honda once again wished us to put together another project vehicle and as much as we would have loved to build a very aggressive project for the 2013 Accord, we did only have the vehicle for only 1 week and as well had two other project vehicles that where under works at the same time for the event, 2013 Hyndia Electra and a Twin Turbo 911 Porsche Cab.


Thank you steelbluesleepR for the kind words. More is to come with all of our projects and we are always excited with new ventures!

[oneoffaccord]

you cant blame BISI for doing what he can do in 1 week. IF he wouldve had it far longer i bet things wouldve been alot different. I do think he couldve went with a different approach with the wheels and seats. But all in all its better than nothing