oneoffaccord : 1991 Civic DX

[oneoffaccord]

Prothane shifter bushings came in today. Might installed the kit, shift linkage and exhaust aswell

[oneoffaccord]

Got a couple of updates here. Got the shifter bushings the other day,went to install them went some what well. The rod with circle part went in fine, im guessing this part is the conversion kit, well the other half of the kit is missing. So now i have to cut and weld a factory DA part to make it work.

Picked up the rest of the fuel setup today. Got that all squared away, looks great. Also picked up these Duralast lower ball joints aswel, now all i need are the wheel bearings and im set.

Prothane shifter bushing kit



Earls Fuel Filter and fitting



Ended up using a factory fuel banjo fitting that i cut for the fuel rail, also wire wheeled it before hand



the finished project



Duralast lower ball joints

[oneoffaccord]

Got a couple of things today, went to autozone picked up the front wheel bearings and the coolant bypass house. Struts came in today. Taking the knuckles, wheel bearings, lower ball joints, hubs, struts, strut mounts tomorrow to work together everything installed.


Duralast wheel bearings and lower ball joints, painted knuckles, and hubs



Tokico Blues





Used SKUNK2 coilovers, yea they are beat looking but they were free



Mod list updated

[oneoffaccord]

bearings, ball joints and hubs installed. will be installing the rest of the suspension tomorrow

[F20A CB7]

Clean them up, can't wait to see them on the struts

[oneoffaccord]

Clean them up, can't wait to see them on the struts

thanks man.

Ran into a problem today, lower forks dont fit the struts. i think the forks are for a EG civic. now i gotta get another set of forks that are made for EF civic

[F20A CB7]

junkyard if u can find it there. Clean it up an do wat u do best man. Diy it.

[oneoffaccord]

junkyard if u can find it there. Clean it up an do wat u do best man. Diy it.

just ordered a set from cali for $50

[oneoffaccord]

Got the struts all done and mounted in, installed both front and rear strut bars. Installed the rotors, calipers, and pads on the knuckles. So when its time to install them i can just installed and be good.

Also painted the front crossmember gloss black

[F20A CB7]

Take it down the track when u r done at least once. Well maybe a few times =)

[oneoffaccord]

Take it down the track when u r done at least once. Well maybe a few times =)

if i have time i will

[Shadow1]

Looks good man. Get it done. Like the new process.

[oneoffaccord]

Looks good man. Get it done. Like the new process.

thanks sir

[oneoffaccord]

Big thanks to [CP]Mike for coming thru and soldering my injector wires.

[oneoffaccord]

More updates tonite, sparyed SEM undercoating on the front wheel wells, installed the front crossmember, Skunk2 upper control arms and last are the knuckles. Wish i had the forks so i can at least move the car around more updates coming soon