Announcement

Collapse
No announcement yet.

Need help trans not shifting.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help trans not shifting.

    Goodmorning guys,
    Need some help.
    So I replaced the solenoid.
    The car was shifting fine, I got her down to the gas station, and now its not wanting to get into any gear.
    Thoughts?
    I dont feel any jerk when I goto shift?
    No D4 blinking.
    Check Engine light is on, going to pull that code.

    #2
    check the shift cable...either that or your transmission is toast.
    Henry R
    Koni/Neuspeed
    1992 Accord LX R.I.P
    1993 Accord EX OG since 'o3
    Legend FSM

    'You see we human beings are not born with prejudices, always they are made for us,
    made by someone who wants something' -1943 US War Department video

    Comment


      #3
      Originally posted by henroc View Post
      check The Shift Cable...either That Or Your Transmission Is Toast.
      P1768
      code that I dont know what it means.
      Last edited by jhoff; 08-04-2012, 11:53 AM.

      Comment


        #4
        What about your TCU? I replaced mine like 3 times when I had my CB.
        1990 Accord EX

        Comment


          #5
          Thought about it.
          Could it be bad?

          Comment


            #6
            Originally posted by jhoff_cb7 View Post
            Thought about it.
            Could it be bad?
            Yes it could be bad/ faulty. Open up the case that surrounds it . If its burn't out it will have a fowl smell inside the casing. ( Easiest way I know to check ) If its bad you must stay yearly related when purchasing a new/used one( 90 & 91) (92-93). While your at it , check and see if you have any water that has been leaking on the TCU .

            A man that keeps looking back can't see whats in front of him.

            Comment


              #7
              Originally posted by stretch JDM View Post
              Yes it could be bad/ faulty. Open up the case that surrounds it . If its burn't out it will have a fowl smell inside the casing. ( Easiest way I know to check ) If its bad you must stay yearly related when purchasing a new/used one( 90 & 91) (92-93). While your at it , check and see if you have any water that has been leaking on the TCU .
              Sinice I am have a 96, I have to get a 96?

              Comment


                #8
                ...96 or 97. When my 1st TCU went out I got a 93 and it didnt work(I had a '90 sedan) so I agree with Stretch JDM.
                1990 Accord EX

                Comment


                  #9
                  Ordered the bottom solenoide this morning.
                  I hope to get it soon, so I can get it installed and see if that fixes the trannie.

                  Comment


                    #10
                    Originally posted by jhoff_cb7 View Post
                    Ordered the bottom solenoide this morning.
                    I hope to get it soon, so I can get it installed and see if that fixes the trannie.
                    found this for you. http://www.obd-codes.com/trouble_codes/honda/
                    this was put together by evil_demon_01 . You can also fined all this and more by him in the Common Beginner Technical Info can be found in here. PLEASE READ HERE FIRST

                    Not this one though.1990 to 1993 accord fuel psi .

                    Car safety checks

                    Diagnose a Check Engine Light (also S/D4 transmission error codes)
                    How to Set Base Idle Properly (F22ax, F22bx)
                    Cheapest Suspension Setup to Lower Your CB7

                    Fluid Capacities

                    Comment

                    Working...
                    X