Buddy's S13.4 vert...

[90ACCORDLXGUY]

A quick little shoot before it started to rain...


DSC_2394npb by NButtz, on Flickr


DSC_2395npb by NButtz, on Flickr


DSC_2400npb by NButtz, on Flickr


DSC_2401npb by NButtz, on Flickr


DSC_2403npb by NButtz, on Flickr


DSC_2405npb by NButtz, on Flickr


DSC_2406npb by NButtz, on Flickr


DSC_2409npb by NButtz, on Flickr


DSC_2410npb by NButtz, on Flickr


DSC_2411npb by NButtz, on Flickr


DSC_2413npb by NButtz, on Flickr

Just thought I would share. This is what replaced his first 240sx which is now mine.


I will most likely be painting this car. Watch out for pictures of next season!

[90ACCORDLXGUY]

Recent pictures of this car...


DSC_2502npb by NButtz, on Flickr


DSC_2507npb by NButtz, on Flickr


DSC_2508npb by NButtz, on Flickr


DSC_2509npb by NButtz, on Flickr


DSC_2511npb by NButtz, on Flickr


DSC_2513npb by NButtz, on Flickr


DSC_2517npb by NButtz, on Flickr


DSC_2519npb by NButtz, on Flickr

[90ACCORDLXGUY]

DSC_2521npb by NButtz, on Flickr


DSC_2524npb by NButtz, on Flickr


DSC_2530npb by NButtz, on Flickr


DSC_2533npb by NButtz, on Flickr


DSC_2535npb by NButtz, on Flickr


DSC_2540npb by NButtz, on Flickr


DSC_2542npb by NButtz, on Flickr


DSC_2543npb by NButtz, on Flickr

350Z tie rods

DSC_2552npb by NButtz, on Flickr

[90ACCORDLXGUY]

.

Did more work on the car! Finished front end suspension up, well kinda. I had it all torn apart and forgot to cut the stops off my lca. So more steering angle will happen!

350z tie rods were too short, so I cut my teins shorter.


Installed era1 tie rod relocaters.


Buttoning up the rest. Boots, outer tie rods, aligning.


Angle as is, more to go.




And how much more I can go till it hits tension rod, once I cut lca stops.



Than I built my rear bash bar, later nick named battle bumper. Pretty? No. Welds nice? No. Perfectly square and true? No! Do I care? No! I used borrowed tools, a 110 mig, dull AF portaband, and scrap metal my buddy got from work. I had fun building it and that's all that matters.









That's all. Enjoy.

[baracuda]

very awesome, wheels angle is nuts!!!

[90ACCORDLXGUY]

Teaser...


DSC_2720npb by NButtz, on Flickr

[Cb_JoeyG]

Lookin good Nick its coming along nicely. Whose makin the cage?~

[90ACCORDLXGUY]

My buddy had the cage done at Garage Autohero, did an awesome job!

[oneoffaccord]

i love this build, i cant wait for the end result