Breaking In to my car

[MRKIKKOMAN]

Well I have lost my keys and I think they might be inside the car. Is there anyway to get inside without causing any damage? Thanks.

[SN2BH22CB7]

Well I have lost my keys and I think they might be inside the car. Is there anyway to get inside without causing any damage? Thanks.

depends....

do you have a sedan or coupe?

[verothacamaro]

if your friends or anyone you know have a honda.......use their key.

[kouzie]

or take your title to locksmith....thats what i did....

[MRKIKKOMAN]

title is in my hometown about an hour away. Im at college. I do have registration but its in the car.

I have a sedan.

It is in a parking garage right now. And locksmiths are expensive around here.

Only friends that have hondas are a 98 accord and 06 civic.

[deevergote]

get a coat hanger and work it through the side of the window. It might do some slight damage, but not too much. Or call a locksmith.


SOME honda keys will work... get all your Honda friends to try their keys

[MRKIKKOMAN]

What am I looking to grab with the coat hangar?

[Losiracer2]

well when those assholes stole my radio, they bent the window trim piece upwards, that black tab on the front window. I've got a coupe though so it may not work.

[Bboy_Trevstuh]

When they stole my radio, the used a coat hanging on my driver side door!

[MRKIKKOMAN]

hmm Ill have to try the coat hanger thing

[SN2BH22CB7]

yeah...I was going to say something ..but deeve already said what I was going to say..


take a IRON hanger...

unbend it..( to where its straight )

leave a little hook on the end ...to get the lock open

take a flathead...pry LIGHTLY ...under the rubber seal and the window ( outwards )..then slide the straightened hanger inside the car...move it to where the hook gets under the lock ( the hook should look like a "J" rather than a "L" )

reason being...the "L" shape WILL NOT grab as good as a "J" shaped hook!

so make sure the hook looks like a "J"

when you get the hook under the lock...try not to be so nervous..and dont apply too much pressure to the window ( or it will crack and break )...just enough to give you slack to move the "JIMMY" around

and come back and tell us your success of opening you door

NOTE: when you unbend the hanger...leave a little curve to it ( trust me...the curve helps get the "J" under the lock lever to unlock it )

^ use common sense to worm the curved hanger under the lock lever!

[MRKIKKOMAN]

wow great detail! Thanks a lot man. I'm going to try this soon. Hopefully I dont break the window...

[C91BLX7]

yeah...I was going to say something ..but deeve already said what I was going to say..


take a IRON hanger...

unbend it..( to where its straight )

leave a little hook on the end ...to get the lock open

take a flathead...pry LIGHTLY ...under the rubber seal and the window ( outwards )..then slide the straightened hanger inside the car...move it to where the hook gets under the lock ( the hook should look like a "J" rather than a "L" )

reason being...the "L" shape WILL NOT grab as good as a "J" shaped hook!

so make sure the hook looks like a "J"

when you get the hook under the lock...try not to be so nervous..and dont apply too much pressure to the window ( or it will crack and break )...just enough to give you slack to move the "JIMMY" around

and come back and tell us your success of opening you door

NOTE: when you unbend the hanger...leave a little curve to it ( trust me...the curve helps get the "J" under the lock lever to unlock it )

^ use common sense to worm the curved hanger under the lock lever!

Rate of stolen CB7"s has just gone up by 15%

[1990Ex]

hell yeah lol

[Gemini]

Rate of stolen CB7"s has just gone up by 15%

more like 50%.... stealing a cb for dummies will be on sold shortly.