my phearable ecu was running lean at WOT, and for now all i have is the VAFC to tune. i had no idea what to put in besides doing the 1/4 and repeating, but that was a mess.
so i started looking at dyno charts for h22's with close to my mods, and i marked my settings based on the lean run on this dyno compared to best run.... it worked great, vtec pulls almost perfect, im willing to bet i came pretty close.
the numbers are for correction percent on the vafc at that RPM
edit: Notice vtec was set at 5250 rpms which is where tq and hp are the same, then they moved it down to 4800 rpms, and it made much more power, of course they added fuel as well.
so i started looking at dyno charts for h22's with close to my mods, and i marked my settings based on the lean run on this dyno compared to best run.... it worked great, vtec pulls almost perfect, im willing to bet i came pretty close.
the numbers are for correction percent on the vafc at that RPM
edit: Notice vtec was set at 5250 rpms which is where tq and hp are the same, then they moved it down to 4800 rpms, and it made much more power, of course they added fuel as well.
Comment