Announcement

Collapse
No announcement yet.

my car's posting :sad:

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    my car's posting :sad:

    the car isnt all the way back to stock but ive started to write the listing. tell me what you guys thinkk on the price. Note: i done everything myself except the paintjob, alignment and exhaust.

    1990 Honda Accord EX

    225k

    • New engine put in at 211k
    -Brand new from factory
    -Properly broken-in
    -oil change at 100, 500, 2000 and 3500 miles

    Parts that have been replaced during ownership:
    • Exedy Oem clutch
    • New Flywheel
    • Whole distributor
    • Spark plug wires
    • NGK Iridium Spark Plugs
    • Transmission axle seals
    • All accessory belts
    • Thermostat
    • Air filter
    • Fuel injectors have been serviced/cleaned
    • Radiator hoses
    • Main Relay
    • Front motor mount
    • Catalytic Converter
    • Exhaust Piping
    • O2 sensor
    • Clutch Line
    • Vacuum Hoses

    • Front axles with lifetime warranty from autozone
    • Front sway bar end link
    • Radius Rod bushings
    • Front Rotors
    • Front brake pads
    • Rebuilt Front calipers
    • New rear tires

    • 17% rear tint
    • RR window motor
    • Passenger door handle
    • Front speakers upgraded to 5.25
    • Frost White paint job
    • Emblems shaven off
    • Rubber antenna, no more power antenna
    • Alarm system with keyless entry

    Over the last three years of driving and fixing the car, it has not given me any major problems. The reason why the engine was changed was because I got the engine at a very good price from the local high school shop. It was getting an average of 28-30mpg when the old engine was taken out. This engine still needs to be broken in some more and has never been raced or highly abused. Engine oil changed religiously. The car drives absolutely mint and definitely should last for another 20 years with the regular maintenance intervals. The 5 speed manual transmission fits the car well with enough low-end and decent highway power.

    The only cons about the car is that the RR window motor went out, replaced with another but the window goes up and down really slow still. The paint job isn’t high quality and is flaking in some areas. It is a clean title but has been in a minor accident, the passenger corner was pushed in a bit. I did my best to re-align it and replaced the fender, headlight and bumper supports. It does not affect the driving or alignment whatsoever.

    The car is very well-built however I am turning to something a bit more luxurious and power. The price is set on firm but money does talk.

    Asking 2200 USD, I highly advise coming for a test drive prior to purchase (need driver’s license and identification for test drive)

    Thank you.
    I <3 G60.

    0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

    #2
    fair enough price...

    just show receipts for parts or wateva u got for proof to next new potential owners..

    btw...those 5gen ex rims still on them?

    Comment


      #3
      I agree that the price is fair, especially with the new engine! Sorry to see you're moving on. What do you have in mind to replace it?






      Comment


        #4
        Originally posted by deevergote
        I agree that the price is fair, especially with the new engine! Sorry to see you're moving on. What do you have in mind to replace it?
        x2
        The OFFICIAL how to add me to your ignore list thread!

        Comment


          #5
          Originally posted by sackingz123
          fair enough price...

          just show receipts for parts or wateva u got for proof to next new potential owners..

          btw...those 5gen ex rims still on them?
          thats the problem, everything was done by myself and i have no receipts for anything including the engine.

          everything is stock, the rims are sitting in my room :o

          i really want a LS400 or a 4runner to turn into a potential rock crawler.
          I <3 G60.

          0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

          Comment


            #6
            from the import scene to the rock crawling scene, man what a jump
            lisa is long gone, but sophie is here!

            i got a good feeling about this one

            im going to have to
            __________________________
            |.......................................|||
            |...OVERNIGHT PART'S 4RM....||'|";,__
            |..............JAPAN.................|| ---**-)
            |_..._...____________======||_|_|__--]
            "(@)'(@)''''''''''''''''''''''''*|(@)(@)*****" (@)
            check out my mr thread
            http://www.cb7tuner.com/vbb/showthread.php?t=106541

            Comment


              #7
              im interested in everything... :o
              I <3 G60.

              0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

              Comment

              Working...
              X