Upgraded D16z6 Vtec Camshaft Question!

[91accord4door]

Well i have been searching for 2 days now with no real find. I have a 93 Civic Ex Coupe, (D16z6 Sohc Vtec)....i wanted to upgrade my cam and have been searching for options...i have a second cam for my motor just laying around and i havent been able to find any company that will regrind a cam for my car, unless im looking in all the wrong places? My second option was to look for a company that sells aftermarket quality camshafts....also didnt find much, all i find is cam's for the B series engines, so im lost and figured i would make a thread to see if theres any feedback that can help me. I am looking for a more agresive camshaft than stock....but not all out race! So if you have any input please post up and/or pm me. Thanks.

[91accord4door]

Found these 2 aftermarket cams for my car and was wondering if anyone had any feedback on anyone of these cams, i think it would be cheaper to have my stock cam reground....but its easier to just buy one of these probably....opinions please. I would just be going with a stage 1 street came......for now.
http://www.sfxperformance.com/parts/COM59100.htm
http://www.crower.com/cat/import/honda/cams/d16z.shtml

I know Crower is a great brand for camshafts.....one of the best in the business!

[501accord]

delta will regrind anything..

[KillerCam282]

delta will regrind anything..

Double check it, but I think they don't do VTEC's. That could be Wever I am confusing it with tho.

[JaK FRoSTWhiTE]

How agressive do you want to go? Im guessing something mild that you wont need to upgrade your valve springs and such right?

[d112crzy]

Double check it, but I think they don't do VTEC's. That could be Wever I am confusing it with tho.

you're right, they dont do vtecs.

[501accord]

opps sorry, didnt realize he had the tehck

[d112crzy]

opps sorry, didnt realize he had the tehck

it says right in the title.

[KillerCam282]

it says right in the title.

Damn it, stop pwning Harold.

[91accord4door]

Delta will not touch vtec cams....i want to upgrade to a stage 1 so i can keep my stock valvetrain...anyone have any input on the cams i posted in my 2nd post? Has anyone bought any cams from either of them? thanks.

[KillerCam282]

Crower always recommends upgrading to their valvetrain with thier cams. And, I have seen what happens when you don't...shit breaks. Either the cam itself or some springs, depending on the profile. My Crower Turbo intake cam snapped in half, and I had the crower valvetrain. However, I did run some miles without the Crower valvetrain first.

Moral of this post: If you buy crower, you will be spending about 500 dolllars to make sure you have a reliable setup. Any less, and you will get shafted...

[501accord]

Damn it, stop pwning Harold.

harold? who the fuck are you calling harold?

[KillerCam282]

harold? who the fuck are you calling harold?

Eh, my bad...confused you with someone else on here.

[501accord]

Eh, my bad...confused you with someone else on here.

eh fuck it, im not even going to start this. too tired to put up with assholes today. night

[91accord4door]

bump