Announcement

Collapse
No announcement yet.

i think i seized the engine...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    i think i seized the engine...

    well, i think my engine is dead but i look at it better tomorrow...

    Story is, i was going 15mph and sudenly it felt like it was blocking (like if i was missing fuel..) then the engine died. The starter isn't even able to crank the engine. so my guess is: oil shortage...engine seize. I'm so frustrated right now, cause i did add oil last week, and my engine never took oil and it wasn't leaking at all. My only guess is my turbo has been eating it

    30 minute earlier i was checking my oil pressure gauge and it was fine... i did'nt had the time to look at it when the engine died.
    Last edited by labatt50; 06-07-2006, 04:46 PM.

    #2
    im assuming many others have old f22's sitting in their garage like me.

    but remember like 500 will get you a f22 b
    I <3 G60.

    0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

    Comment


      #3
      Update:... i was able to crank to engine...

      Engine is not seized...
      Oil level = Perfect
      Timing belt = OK
      Oil pressure = Ok
      Cold Compression test = 150 - 155 - 150 - 155
      Fuel is 94octane...

      I was able to start the car... but there is a knocking sound but the engine run smooth??! Idle is stable... no check engine...

      So tomorrow i'm gonna remove the pan to see if there is anything there... i hope its only a bolt i left there...
      Last edited by labatt50; 06-08-2006, 06:39 PM.

      Comment


        #4
        well, it was raining today and it will rain for the next 3 days... so i will not remove the oilpan for now... i,ll wait until the sun comes out...

        But while i wait, is there anyone that have something to say for what my problem would be? Could it be something stuck in the flywheel? or even dead bearing? Not too sure where to look after what i already check...

        Comment


          #5
          Originally posted by labatt50
          well, it was raining today and it will rain for the next 3 days... so i will not remove the oilpan for now... i,ll wait until the sun comes out...

          But while i wait, is there anyone that have something to say for what my problem would be? Could it be something stuck in the flywheel? or even dead bearing? Not too sure where to look after what i already check...
          That's crazy...it sounds like a bearing problem to me though.


          Originally posted by lordoja
          im with you on that one bro! aint nothing beat free food and drinks any day of the week, even if its at a funeral

          Comment

          Working...
          X