i didnt know where else to post as im not selling yet this is more along the lines to see if anyone else wants it done.
so far i am about half way through into completely changing all vacuum, oil, heater and coolant lines in my CB over to platinum cured silicone hoses. I have been running most of my vac lines like this for well over 6 months and 50k miles, went from San Diego to Vegas twice with no more than one hour stop, thats 6 hours of constant driving, sometimes i hit well over 100mph and no failure of any kind.
I have done my friends 1986 Z31 (300ZX) and a 1998 Civic both have had no problems, an i am about to do a 2006 Lancer RallyArt and a 2009 Lancer GTS as well. I am doing all the measurements with a caliper, three measures of every line and fitting to ensure all are fitted right.
My question is would anyone else be interested in getting a kit done for the CB7? i can do any other car, i just need the car in front of me. The kit for the CB7 will depend on what you want done, for example the black box to I/M hoses alone will run $20 shipped, everything will be cut to fit along with any hardware needed and complete instructions.
I can do Red, Blue, Yellow, Silver and of course Black.
anyone interested?
oh yea i can also wrap and manufacture almost anything in CF, Fiber Glass and Kevlar, i got my fabricating cert for that.
so far i am about half way through into completely changing all vacuum, oil, heater and coolant lines in my CB over to platinum cured silicone hoses. I have been running most of my vac lines like this for well over 6 months and 50k miles, went from San Diego to Vegas twice with no more than one hour stop, thats 6 hours of constant driving, sometimes i hit well over 100mph and no failure of any kind.
I have done my friends 1986 Z31 (300ZX) and a 1998 Civic both have had no problems, an i am about to do a 2006 Lancer RallyArt and a 2009 Lancer GTS as well. I am doing all the measurements with a caliper, three measures of every line and fitting to ensure all are fitted right.
My question is would anyone else be interested in getting a kit done for the CB7? i can do any other car, i just need the car in front of me. The kit for the CB7 will depend on what you want done, for example the black box to I/M hoses alone will run $20 shipped, everything will be cut to fit along with any hardware needed and complete instructions.
I can do Red, Blue, Yellow, Silver and of course Black.
anyone interested?
oh yea i can also wrap and manufacture almost anything in CF, Fiber Glass and Kevlar, i got my fabricating cert for that.
- size limit on sigs is 300 pixels tall, 800 wide, total, including any pics or text. Deev's been known to revoke sig privileges. 
for the CF it depends what you want done, or how much you looking to spend we can work something out just PM me
Comment