Ok. A local guy, who's friends with one of my friends has this car up for sale..tell me if u think it's a good deal or not..
Power made: 417HP to the wheels @ 30psi with 409 torque (this was before the new head and intake manifold)
Specs:
Fully Built motor
bottom end:
Wiseco pistons
eagle rods
polished crank
golden eagle sleeves
Cometic head gasket
Balnced
25,000 miles on bottom end
Head:
Crane turbo cams
Web cams dual valve springs
titanium retainers
stainless seats
SI .5mm oversized swirl polish valves
street port job
Skunk 2 cam gears
3500 miles on new head
Fuel management: Hondata S100
GM 3bar map sensor
RC660's
Chasis has 100K on it. No rust anywhere whatsoever.
Ride: 97 Acura Integra
Custom interior (full redye, headliner, carpet, seats)
Corbeau racing seats
Tinted windows
Keyless entry with autopage alarm
Alpine DDDrive components in doors
JVC mp3 player deck
Monster Cable wiring
Infinity Basslink
Indiglo fuel and temp gauges
Reverse indiglow Tach and speed gauges
HID interior lights
HID back up lights
PIAA high beam bulbs
McCuloch HID 6000K
Weopon-R throttle Rotor (billet)
Custom Taillights
APC Clear corner lights (front)
Broadway mirror
Enkei RSV anthracite & polished lip 17" rims
Khumo ecsta supras 205-40-17 (rims and tires only 2 months old)
Gorilla Lug locks
Wings West RS body kit
Custom modified Front bumper
Shaved emblems
Shaved front plate
GSR Spoiler
Vinyl eyebrow and low brow
Polished valve cover
tenzo-r shift knob
Billet Battery tie down
Billet Aluminum oil cap
Prothan motor mount inserts
Random Tech 3" stainless cat back exhaust (ONLY 2 MADE EVER, 3yr warranty)
Test Pipe
ACT 2600 6 puck clutchTenzo-R Springs
Tenzo-R rear strut brace
Tenzo-R Valve Cover Breather
B&M adjustable fuel pressure regulator
B&M fuel pressure gauge (filter mounted)
AEM high flow fuel Rail
AEM under-drive pulley (PS)
Taylor 409 race wires 10.4MM
Victor X intake manifold]
Hondata heat shield gasket
Tokiko blue shocks
Turbonetics T3/T4S 60-1 Turbo (polished)
DRAG exhaust manifold (ported)
Tial wastegate
HKS SSQ BOV
S-AFC (apexI)
Elite manual boost controller
Gator Racing axles (450hp capable, custom made)
Auto Meter Shift Light (6k and 7k pills included)
Auto Meter EGT Gauge (phantom white)
Auto Meter boost gauge (phantom white)
Auto meter oil pressure gauge (phantom, needs new sender)
Auto meter a/f gauge (phantom white)
Auto Meter Pillar pods (all four on driver pillar)
Walbro 255 in tank fuel pump
Streamline Radiator Fans
Precision Trubo and Engine 750HP cast endtank intercooler
2.5" piping
K&N Intake Air filter (4" intake and filter)
he said he'd take 12,000 for it..also includes the following, but not installed:
- Brand new ACT street light flywheel (not installed). this should help her go a bit faster and make a bit more power as well since it is helping the engine free rev faster and free some power from the heavy stock flywheel [$300 value]
- Brand new ACT 6 puck disc for the clutch (not installed) [$80 value]
- Brand new bearings (release and throwout) [$20 value]
- New Mickey Thompson 24.5" x 8" x 13" slicks on custom made Lenso wheels that fit perfectly snug on the teg. [$900 value]
- Brand new B&M scatter shield (not installed). you will need this if you are running 11's. I didn't put it on yet cause she went into storage. [$150 value]
- I also have a brand new Precision Turbo and Engineering SC61 ported shroud S70 stage 5 wheel turbo, not installed, that I may throw in with the deal so you can sell the one on there and put that bad boy on but I am not sure yet. Make me a good offer and Ill throw her in. Thats about an extra $900 value added as well. That turbo is gorgeous and well worth it but I am buying a house so I need to put all projects on hold for a bit.
what do ya think?
-A. Swift
Power made: 417HP to the wheels @ 30psi with 409 torque (this was before the new head and intake manifold)
Specs:
Fully Built motor
bottom end:
Wiseco pistons
eagle rods
polished crank
golden eagle sleeves
Cometic head gasket
Balnced
25,000 miles on bottom end
Head:
Crane turbo cams
Web cams dual valve springs
titanium retainers
stainless seats
SI .5mm oversized swirl polish valves
street port job
Skunk 2 cam gears
3500 miles on new head
Fuel management: Hondata S100
GM 3bar map sensor
RC660's
Chasis has 100K on it. No rust anywhere whatsoever.
Ride: 97 Acura Integra
Custom interior (full redye, headliner, carpet, seats)
Corbeau racing seats
Tinted windows
Keyless entry with autopage alarm
Alpine DDDrive components in doors
JVC mp3 player deck
Monster Cable wiring
Infinity Basslink
Indiglo fuel and temp gauges
Reverse indiglow Tach and speed gauges
HID interior lights
HID back up lights
PIAA high beam bulbs
McCuloch HID 6000K
Weopon-R throttle Rotor (billet)
Custom Taillights
APC Clear corner lights (front)
Broadway mirror
Enkei RSV anthracite & polished lip 17" rims
Khumo ecsta supras 205-40-17 (rims and tires only 2 months old)
Gorilla Lug locks
Wings West RS body kit
Custom modified Front bumper
Shaved emblems
Shaved front plate
GSR Spoiler
Vinyl eyebrow and low brow
Polished valve cover
tenzo-r shift knob
Billet Battery tie down
Billet Aluminum oil cap
Prothan motor mount inserts
Random Tech 3" stainless cat back exhaust (ONLY 2 MADE EVER, 3yr warranty)
Test Pipe
ACT 2600 6 puck clutchTenzo-R Springs
Tenzo-R rear strut brace
Tenzo-R Valve Cover Breather
B&M adjustable fuel pressure regulator
B&M fuel pressure gauge (filter mounted)
AEM high flow fuel Rail
AEM under-drive pulley (PS)
Taylor 409 race wires 10.4MM
Victor X intake manifold]
Hondata heat shield gasket
Tokiko blue shocks
Turbonetics T3/T4S 60-1 Turbo (polished)
DRAG exhaust manifold (ported)
Tial wastegate
HKS SSQ BOV
S-AFC (apexI)
Elite manual boost controller
Gator Racing axles (450hp capable, custom made)
Auto Meter Shift Light (6k and 7k pills included)
Auto Meter EGT Gauge (phantom white)
Auto Meter boost gauge (phantom white)
Auto meter oil pressure gauge (phantom, needs new sender)
Auto meter a/f gauge (phantom white)
Auto Meter Pillar pods (all four on driver pillar)
Walbro 255 in tank fuel pump
Streamline Radiator Fans
Precision Trubo and Engine 750HP cast endtank intercooler
2.5" piping
K&N Intake Air filter (4" intake and filter)
he said he'd take 12,000 for it..also includes the following, but not installed:
- Brand new ACT street light flywheel (not installed). this should help her go a bit faster and make a bit more power as well since it is helping the engine free rev faster and free some power from the heavy stock flywheel [$300 value]
- Brand new ACT 6 puck disc for the clutch (not installed) [$80 value]
- Brand new bearings (release and throwout) [$20 value]
- New Mickey Thompson 24.5" x 8" x 13" slicks on custom made Lenso wheels that fit perfectly snug on the teg. [$900 value]
- Brand new B&M scatter shield (not installed). you will need this if you are running 11's. I didn't put it on yet cause she went into storage. [$150 value]
- I also have a brand new Precision Turbo and Engineering SC61 ported shroud S70 stage 5 wheel turbo, not installed, that I may throw in with the deal so you can sell the one on there and put that bad boy on but I am not sure yet. Make me a good offer and Ill throw her in. Thats about an extra $900 value added as well. That turbo is gorgeous and well worth it but I am buying a house so I need to put all projects on hold for a bit.
what do ya think?
-A. Swift
Comment