What parts would you like for Fushigi R.E.S. USA to make?

[JDMcb7]

Fushigi, if you are going to be commited to making 4th gen parts, then I really want to help you advertise. We need to encourage any and all companies to make parts for us, because as well all know they are hard enough to find anyways. If you have some sort of decal(s) that are relatively small (sorry no windshield banners) I would be more than happy to put them on my car and help you advertise for free. Anything to help the continuation of part development/design for cb7's is something the whole community desperately needs. PM and let me know what's up

[i_love_cb7]

spoliers, bodykits.....

Adding V-tec to the f22ax and still be able to boost would be nice.
should make it a kit. etc putting a f22b head on the f22ax.

[93accord2dr]

Fushigi, if you are going to be commited to making 4th gen parts, then I really want to help you advertise. We need to encourage any and all companies to make parts for us, because as well all know they are hard enough to find anyways. If you have some sort of decal(s) that are relatively small (sorry no windshield banners) I would be more than happy to put them on my car and help you advertise for free. Anything to help the continuation of part development/design for cb7's is something the whole community desperately needs. PM and let me know what's up

ya totally, but if the windshiled banner was tasteful then I would rep Fushigi.

[93accordexcoupe]

oh yeah and some Red/Clears for 92-93 Coupes

yes! i knew there was something else i should have said when i posted before. this is it.

Fushigi, if you are going to be commited to making 4th gen parts, then I really want to help you advertise. We need to encourage any and all companies to make parts for us, because as well all know they are hard enough to find anyways. If you have some sort of decal(s) that are relatively small (sorry no windshield banners) I would be more than happy to put them on my car and help you advertise for free. Anything to help the continuation of part development/design for cb7's is something the whole community desperately needs.

that too, we should run the fushigi logo! as long as its not a huge vinal that runs the entire car length will flames and naked chicks on it im down!

[AccordWarrior]

I'd just like to see a stronger rear strut bar as well as a rear tie bar. Something stronger than the adjustables they sell on Ebay.

[deevergote]

Here's my chance! There are SO many things I would like to see come from a CB7 dedicated company... I'll definitely add my suggestions here as I come up with them. There have been plenty of things in the past that I have said "I wish we had that!"

The LSD would be good... Something similar to the Quaife piece, but hopefully a little less expensive. From what I've heard, Quaife LSD (or whatever they call it, I don't believe they refer to it as a true LSD) provides the best drivability. I'm into having a fast car that is just as good on the street running for groceries as it is on the track.

Fizzbob7's suggestion is awesome, and something I never thought of. I know that Bisi used the CRX transmission with an F22 engine, so I know such a conversion must be possible. I would LOVE to be able to use a B series tranny with my H22! An adapter plate would certainly be something that no one else offers! At least that I know of, anyway! I can't take credit for that suggestion, but I second it!

A roll cage, full and/or partial, would also be good. Especially for those who want to get serious about racing.

A set of coilovers that are better than the current offerings... Something along the lines of the Tein Type Flex line, which isn't made for our cars. That seems to be pretty involved though...

An affordable standalone unit for either the H22 or the F22 (or both...). It seems that even Hondata is pretty expensive. Again, that might be asking too much...


I know I have plenty more ideas, so I'll bring this thread back from the dead occasionally

[NoSloCB7]

I'm loveing the ideas guys! Keep them comming.

[SoySauceCb7]

how abotut a custom made HUGE air induction box and ITBS for my f22! o and how about a cb7 for me!!!!

[NoSloCB7]

LOL...You know that induction box is waiting to be made for you as soon as you get another race car...The ITB's are a real good possibility. Of course, you know that

[H23Accord]

A Neuspeed style bar for those who have swaps would be great. That way they don't have to modify the valve cover to make it fit.

[mayberry]

the neuespeed bar for swapped cb7s is a great idea. also prefabbed ITBS for F and H series guys!

[ACCORDianate]

How about a froo-froo appearance item or two:

An open grille that has integrated eyebrows all as a one piece unit... I think there's one out there that's super-ultra-mega-uber-rare.

or

a real fiberglass eyebrow kit that covers the tops of the corner lamps in addition to the headlights.

or

a mass production 90-91 and a 92-93 OEM style projector foglight kit that can withstand 100w bulbs without problems.

[wed3k]

i have something that will top all your guy's responses...A WHOLE NEW LIGHTWEIGHT CB7 CHASSIS!!!

most of your guy's requests are already on the market, cmon think of something more useful or hard to find.

[rebels]

FushigiRES, PM me and we can work out some deals with the companies. We make the gaskets like Hondata, along with lambo door kits and such.. we can establish a agreement and sell parts for eachother.

[ChIoVnIdCa]

usdm/jdm style foglights