d00d i just installed my power folding mirrors on to the 92-3 front bumper, sidemarkers and camber kit and ill be ready lets get this thing started already
Announcement
Collapse
No announcement yet.
For those planning to attend the spring Nashville meet...
Collapse
X
-
I'm still wrapping up my suspension, I'll have it driveable so I can get alignment done this weekend. Then, I will finish installing the minor things the following week before the meet.
THINGS TO DO BEFORE MEET:
- install rear swar bar >> DONE
- install front & rear chassis braces >> DONE
- install poly bushings on front sway bar >> DONE
- install short shifter >> in progress
- install driver seat >> within 15 min
- install front knuckles >> DONE
- install front brake assemblies & upgraded parts >> DONE
- reinstall wheels >> DONE
- get alignment/camber adjustment this weekend >> today
- install pssgr front seat & rear, with some interior paneling >> within 15 min
- install antenna >> sometime this week before meet
- oil change >> after alignment
- wash & wax car >> sometime this week before meet
- vacuum & clean interior >> sometime this meet before meet
^ Car will be driveable within the hour and driving it today to get it's alignmentLast edited by HondaFan81; 04-03-2005, 08:51 AM.
Comment
-
i am going to be washing and waxing, getting my wheels(no tires yet too broke), oil change, cleaning the carpets, and doing a full 4-5 hour detail on the interior and engine bay....BLING BLING1996 Jeep Grand Cherokee Laredo
4.0L I-6 2WD
293k miles, still running strong.
Freshly rebuilt transmission.
Comment
-
I have a ton of stuff I need to do:
Change oil
Replace O2 sensor
Replace tie-rod ends
Install new rotors and pads
Pick up wheels and tires
Alignment
Might not seem like much, but I'm short on cash. I should still be able to make it though. My boss scheduled me for the entire weekend the meet is, but I wrote him a note letting him know I will not be working.
Anyway I'm looking forward to the meet, who else has last minute stuff to do?
Comment
-
Can't hardly wait for the meet, might have to quit my job to attend but I'll be there.
So let's get some pics of some of the cars coming.
I'll start it off with a few of mine.
Mostly gutted, no AC, no PS, no carpet, most of the body panels have been eliminated in the hatch, Si seats. Also have a 3 and a half inch tach and a cold air intake. Only have the tach because my stock one dosn't read correctly and only have the cold air intake because the intake I bought the car with didn't clear the hood.
Other than that it's stock with 187k on the clock.
Comment
-
Originally posted by N1ghtM0nkeySo let's get some pics of some of the cars coming.
http://home.comcast.net/~cdub01/chris/3.jpg
Comment
-
cisco check it out http://www.cb7tuner.com/vbb/showthread.php?t=19896
its fixed already though so now onto fixing my fubared fender
of coarse im coming silly
Comment
Comment