Someone with ground controls

[ChIoVnIdCa]

Are they supposed to come with the adjustment tool? Because I didn't get one and if so I have to call them in the morning

[deevergote]

I'm quite sure they are supposed to, yes. Even cheap sleeves come with them. It's not exactly a tool you can go buy at Autozone!

[90Cb7sleeper]

The collar locks w/ an allen bolt in the side, You can turn the collar by hand w/ the car jacked up. This is how my g/fs Ground controls are that i put on her DA.

Edit: Hex head bolt, whatever you want to call it.

[BillKisme]

Yeah i dont remember mine coming with the tool either but like 90cb7sleeper said you can turn it by hand.

[phatdoughnut]

yup no tool... turn by hand, but I always use some old ones just cause sometimes they would get slightly stuck.

[lil_dcb7]

yup no tool... turn by hand, but I always use some old ones just cause sometimes they would get slightly stuck.

You can always use the hammer and flat head method.

[wed3k]

that reminds me, i have to go get new pinch bolts. they use a standard size which i found wierd.

[Losiracer2]

mine adjust w/ an allen wrench? All you have to do is unscrew it and retighten wherever you want to set it at.

[J-specCb4]

You can always use the hammer and flat head method.

i had to do that with my brand new full skunk2 coilovers!

[Maple50175]

yeah they could just tighten with screw

[phatdoughnut]

mine adjust w/ an allen wrench? All you have to do is unscrew it and retighten wherever you want to set it at.

yes then you can adjust the collar with one hand supposdely.. but mine get stuck sometimes..