I has a cb7!!! yay!!

[Dark_Accord]

got it for $300! makes awefull grinding sound in the front right wheel she said its the trans but im not too sure about that but for $300 i couldnt go wrong!

things it needs
grinding fixed
atleast 1 tire (metal showing on front left front right is new both rears are almost at the warning marks)
windsheld
fender
clutch fulid
wash!


things replaced
tire
timing belt
water pump
all belts
valve job
cat
a bunch of gaskets
both axles
etc

heres some pics its a 91 ex coupe



will start a mrt thread tonight with more info etc just got excited and wanted to post pics asap lol

[Dark_Accord]

[TypeG]

i had one of those amps way back when.

those wheels are pretty cool, lol. you should shine them up with some mag and aluminum polish. later.

[kouzie]

I like the bald tires...

[Tippey764]

I never knew coupes came with brown interiors. Its uglier then the red if you ask me lol.

[Dark_Accord]

i had one of those amps way back when.

those wheels are pretty cool, lol. you should shine them up with some mag and aluminum polish. later.

haha gimmie 2 steelies and you can have the rims! i dont like them haha i found spacers in the trunk so this thing had to of been low rider style back in the day!

I like the bald tires...

I never knew coupes came with brown interiors. Its uglier then the red if you ask me lol.

i <3 brown interiors

anywho just took the axle off and without the axle in the car doesent make any werid sounds... i has video so ill post it laters

[ChIoVnIdCa]

how big are the spacers.. All four? send me a pic I may buy them

[Brandoncb7]

For 300 dollars I don't think you did bad at all. Get the video up mang!

[Bboy_Trevstuh]

Good job on picking her up, I picked mine 4 door up for $400 and haven't hit $600 to get her up and running.

[Shag Wagon]

Another goat shit brown interior. Nice!

[Dark_Accord]

yay its the wheel bearing ! fucker just flaps around like mad!

do i have to get it pressed in?

[jboyce]

yay its the wheel bearing ! fucker just flaps around like mad!

do i have to get it pressed in?

I changed the wheel bearing on my old accord didn't have to get it pressed in. Someone told me you had to though

[ibr_adam09]

I like the shifter knob

i have the same floor mats also

[deevergote]

It's easiest to press the wheel bearing in... but I've known people to do it carefully with a hammer I think. I've never done it either way.

Not a bad find. Replace those tires ASAP. I've driven on belts... not fun.
What grinds? The wheel bearing, or the transmission? If the tranny grinds, replace the fluid with GM Synchromesh, or Honda MTF (synthetic, if there are options).
The wood shit is total ass... but whatever.
Why do you have to replace the clutch fluid?


For $300, with the timing belt, water pump, and valve adjustment done... that's a hell of a deal. The motor alone is worth more than the price of the entire car!




Is this your first CB7?

[Dark_Accord]

I changed the wheel bearing on my old accord didn't have to get it pressed in. Someone told me you had to though

true i got half of my bearing out the other half is like stuck in tho

I like the shifter knob

i have the same floor mats also

ima go back to a oem shift knob most likely and i likes the floor mats too

It's easiest to press the wheel bearing in... but I've known people to do it carefully with a hammer I think. I've never done it either way.

Not a bad find. Replace those tires ASAP. I've driven on belts... not fun.
What grinds? The wheel bearing, or the transmission? If the tranny grinds, replace the fluid with GM Synchromesh, or Honda MTF (synthetic, if there are options).
The wood shit is total ass... but whatever.
Why do you have to replace the clutch fluid?


For $300, with the timing belt, water pump, and valve adjustment done... that's a hell of a deal. The motor alone is worth more than the price of the entire car!




Is this your first CB7?

only 1 tire is on the metal belts 1 is new and the 2 back ones are pretty worn but not at the replace marks yet

its the bearing that grinds

and it was hella low on clutch fulid lol i ment add clutch fluid

and yeah that fake wood grain is getting pealed off asap lol

and yeah it seems like a great deal to me too

and yep first cb7
my 4th accord tho







but yeah i took the rotor off to put the new bearing in and i got half the bearing out by using bolts to pull its self out but the other half is stuck in there fuck!!! going to probaly have to drop the hub off at the shop with the new bearing and have them removed and the new one pressed in unless you guys have any other idea