dremels from harbor freight?

[cvc7chris]

are they any good? they have a few online

heres the cheapo for $9.99
http://www.harborfreight.com/cpi/cta...emnumber=94076

and one for $23.99, that's so called professional
http://www.harborfreight.com/cpi/cta...emnumber=40457

and a $29.99 cordless one
http://www.harborfreight.com/cpi/cta...emnumber=92880

idk about the cordless i'm not a fan of cordless, but this one might to the job idk. i need to cut my fender to put in my sidemarkers and just need a dremel to have around for other jobs too. any of u have any of the following models and how do u like it?

i might also get one of those extra rotary accesory kits that come with like 200+ attachments for it it's only like $16 bucks

i looked at home depot, and other places and there prices are alot higher

[Phempa]

if it spins, itll work

if the attachments from a dremel work with that, they I'd say go for it.

if not, then I say get the real deal Dremel. finding additional attachments for the off-brand one might be a bitch.

[92_EX_Ninja]

i bought my dremel for 30 bucks at walmart...imo just go get an actual dremel and be done with it

[cvc7chris]

imma look for one, if not the $9.99 one can at least cut my fenders for my sidemarkers and if it takes a shit on me then it's w/e
or i might try that so called proffesional 4 speed one

[sackingz123]

made in china crap, same stuff u see in the flea markets. go to walmart, you can get a legit one for 30-45 bucks and be able to return within 90 days

[cvc7chris]

made in china crap, same stuff u see in the flea markets. go to walmart, you can get a legit one for 30-45 bucks and be able to return within 90 days

the cheapest one at walmart.com was for like $60

[sackingz123]

the cheapest one at walmart.com was for like $60

i got a one speed dremel for 35 at walmart.

**gotta go to walmart, i just checked walmart.com, they usually dont list everything they got in store.

[cali-racer]

the ones from harbor freight are junk. they dont last long. thats why i went out to home depot and bought a real one that still works 2yrs later.

[2.2litrebeater]

imma look for one, if not the $9.99 one can at least cut my fenders for my sidemarkers and if it takes a shit on me then it's w/e
or i might try that so called proffesional 4 speed one

i have the $10 one, it has NO torque and barely enough power to cut 2 sheets of paper, i only got it because it came free with attachments awhile back.

[Losiracer2]

are they any good? they have a few online

heres the cheapo for $9.99
http://www.harborfreight.com/cpi/cta...emnumber=94076

and one for $23.99, that's so called professional
http://www.harborfreight.com/cpi/cta...emnumber=40457

and a $29.99 cordless one
http://www.harborfreight.com/cpi/cta...emnumber=92880

idk about the cordless i'm not a fan of cordless, but this one might to the job idk. i need to cut my fender to put in my sidemarkers and just need a dremel to have around for other jobs too. any of u have any of the following models and how do u like it?

i might also get one of those extra rotary accesory kits that come with like 200+ attachments for it it's only like $16 bucks

i looked at home depot, and other places and there prices are alot higher

its just like their 19.99 cordless drills. It works but not very well. The batt. doesn't hold a charge for shit and it dies after like 15 min doing simple jobs. You get what you pay for is all I'm saying.

[d112crzy]

Any of the dremels mentioned above will work. What is not guaranteed is how long the dremel will last at high temps/revs. Most can't take 5 minutes of straight revving even at mid load.

[ibr_adam09]

i got a dermal set- 10 speed for 40 bucks at walmart , came with a bag and i think 20 accessories

[cvc7chris]

i see not bad imma have to check out walmart probably

[NAiL05]

I bought my legit dremel for 40-50 bucks at home depot.