I dont know where this fool is, but COME HELP ME GET MY BALLJOINT OFF MY CARS BEEN ON JACKSTANDS FOR 3 DAYS!
-
-
ahahhahhahahahahhahahhaha.
take the wheel asambly off.
open the 4 bolts int the back. that should clear the top of the bolt joint to come out. tap it with the hammer.
then put the new ball joint in. now because the ball joint is kind of pressed there,,, all u need to do is put a piece of wood on top and hit the wood lightly with the hammer.
now the new ball joint have a C clamp. u got to put that on top of the ball joint. u have to play with it for a little bit till u put it on the top of the ball joint.
install everything. and u good to go.
the tools that u really need are. 36mm socket. a big pipe for it.lol
a 2 ton puller for the lower ball joint and for other things. and some wd-40<< life saver.
by the way since u doing all this work i suggest chanign rotors or other things that might need to be changed.
oh and don't fuck up the bolts. i fucked one of mines and i had to wait for the weekend to pass to get it and honda dealer.are we there yet are we there yet are we there yet
-
PM? e-mail? AIM?
Comment
Comment