Anyone tried transporting an H22 in their CB7?

[h22sparkle]

didn't that one girl haul one in her car all the way to TN from Kansas?

too bad i don't live in AZ, i'd go get it for you for the cost of gas and a lunch.
<--- truck owner

and lunch you bastid lol. Diesel is no joke nowadays what you got the cube a straight-truck or trailer. Yeah your best bet would be to ask a friend to haul it for you or do it yourself and leave plenty of sheets on the floor so that you dont mess up the interior cloth on the floor.

[Mista Juice]

hah.. as a matter of fact, the guys that came to get my H22 came in an accord sedan.. he removed the cardboard and the spare.. we took off the intake manifold and temporarily took off and replaced the oil filter and it went in with no problem at all..

[Losiracer2]

okay, i'm about to put it in. lol. I removed my pass. side seat, and set the floor mats down. As i'm looking at it, w/ the intake mani/plenum/dizzy, it doesn't look like it'll fit in the trunk, so i'm just gonna try and put it in the pass seat area. I'll take pics once its in! lol

[tn_accords]

trust me it will fit. nicole brought hers from kansas to tn riding bitch.

[Mista Juice]

okay, i'm about to put it in. lol. I removed my pass. side seat, and set the floor mats down. As i'm looking at it, w/ the intake mani/plenum/dizzy, it doesn't look like it'll fit in the trunk, so i'm just gonna try and put it in the pass seat area. I'll take pics once its in! lol

umm.. read my post again.. it was a piece of cake..

[deevergote]

I think Acclude91 hauled a hoist and like 2 engines in a CB7 to the first big TN meet.

[NAiL05]

Yea I think he posted a few pics of that plus he had nothing in his car!

[Makaveli2k]

I hauled a 2.5liter inline 6 motor along with a 5 speed transmission in my e30 coupe. I took out my passenger seat and my door panel. If I did it in that midget of a car you can surely do an H22. It was about an hour and a half trip each way. From Toronto to Wasaga beach.

Do work! =p

[npor]

too bad i don't live in AZ, i'd go get it for you for the cost of gas and a lunch.
<--- truck owner

x2.

i would rent a home depot truck. or try to think of some friend that would help. offer him gas and lunch.

i wouldn't risk dirtying up/damaging my cb for it.

[excalibur02]

I removed the pass side seat and put some tarp over the carpet so it doesnt get stained. Its easier on a coupe since the door area is wider, but the sedan is fine too.

For the tranny it fits in the trunk with no problem

[bmxicansd]

it can be done.. I removed the spare tire, removed the truck liner and rolled the trunk carpet up. if fits in there, just needs to be carefully placed in there.. I drove around 120 miles before i pulled it back out..

[203Cree]

didn't that one girl haul one in her car all the way to TN from Kansas?

too bad i don't live in AZ, i'd go get it for you for the cost of gas and a lunch.
<--- truck owner

Yup. It was a F motor though. I helped her load it. Kinda tight, but it worked. You'll want to take your door panel off the passenger side too.

[mn_cb7_boi]

y dont you take off your trunk that would give you a few angles and space to turn your motor to fit in the back and just make shur you take out the trunk floor cover and spare then you should be able to fit it in thats what we did with my GSR motor

[kc8enb07]

wtf? mine didnt have a dizzy w/ alt but i set it down whole in my trunk. i just took out the spare. it rode around in there for a week til i had help to get it out, lol. bigblue helped me get it out

[Losiracer2]

well i managed to squeeze it in! Well I'm off to Anthem now lol. I was supposed to BE there at 6:30 and its already 7:41...and I've got work at 7am tomorrow....oh its gonna be a LONG night. lata peeps.