Announcement

Collapse
No announcement yet.

k-1 attack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    good luck gettin one.... they stopped making them back in 03... it also used the accords windshield. also the kits gose for about 19,000 bucks. and most of them now... are not complete

    Please, Leave me some feeedback on my ride ^CLICK ^CLICK ^CLICK
    Originally posted by deevergote.
    But Honda guys know EVERYTHING about EVERYTHING! If you don't believe that, then you're just wrong...

    Comment


      #17
      Originally posted by deevergote. View Post
      "It"? It's a kit car that's in mass production... enough for there to be web forums dedicated to it. There are many in existence. Not exactly common, but it's not a one-off...
      Originally posted by accord2nr81 View Post
      good luck gettin one.... they stopped making them back in 03... it also used the accords windshield. also the kits gose for about 19,000 bucks. and most of them now... are not complete
      so how many are there you think ???

      less than 100?? less than 50?? just woundering
      FS: DSM turbo parts,OEM parts, and more.....
      My Members Ride Thread - R.i.P

      Comment


        #18
        Enough for the company to consider it worth producing for a few years... I don't know for sure how many.






        Comment


          #19
          Originally posted by deevergote. View Post
          Or you could look at my post.
          I intentionally skipped over it
          VIP Status.

          Comment


            #20
            Originally posted by 92vig View Post
            I intentionally skipped over it
            Ok then. You are excused. Accidentally ignoring me is unforgivable. Willfully ignoring me is acceptable.

            ...wait a minute...






            Comment


              #21
              Originally posted by deevergote. View Post
              Ok then. You are excused. Accidentally ignoring me is unforgivable. Willfully ignoring me is acceptable.

              ...wait a minute...
              LMAO....just playin man. I was just skimming through all the posts before I posted.
              VIP Status.

              Comment


                #22
                I had the pleasure in helping build one

                Comment


                  #23
                  Did you get to drive it after it was built?

                  How much CB7 does it actually use?






                  Comment


                    #24
                    Originally posted by Tnwagn View Post
                    Waiting for deev to come in and say he'd rather have a Factory Five Racing kit

                    STILL Haven't said anything about the Factory Five. Damn, guess I was wrong

                    K1 Attack is a badass looking design. In a wreck however


                    Originally posted by Maple50175
                    Oh here we go again. Maples other half.

                    Comment


                      #25
                      I ALMOST did earlier... and would have had I caught that post!


                      That Factory Five kit (their original design) is just way too kickass. Uses all Corvette parts.



                      Of course, for the price... I'll just buy an NSX.






                      Comment


                        #26
                        Originally posted by deevergote. View Post
                        Did you get to drive it after it was built?

                        How much CB7 does it actually use?
                        it uses the front subframe which is mounted in the back of the car, alot of the wiring harness as well as the windshield fram and glass.

                        i spoke with a guy showcasing one at the sema show last year

                        My Wiretuck/ Insane engine bay
                        member ride thread
                        11.86@120mph T66 turbo 612hp F22A
                        DIVULGE MOTORSPORTS
                        People can hate all they want, my f22 is faster than yours.
                        I have literally been on this site for 10 years, I know what i am talking about!
                        John 10:18 "No one takes it from me, but I lay it down of my own accord. I have authority to lay it down and authority to take it up again. "

                        Comment


                          #27
                          Originally posted by deevergote. View Post
                          I ALMOST did earlier... and would have had I caught that post!


                          That Factory Five kit (their original design) is just way too kickass. Uses all Corvette parts.



                          Of course, for the price... I'll just buy an NSX.

                          Haha, all of that post is true

                          Originally posted by turbo90accord View Post
                          it uses the front subframe which is mounted in the back of the car, alot of the wiring harness as well as the windshield fram and glass.

                          i spoke with a guy showcasing one at the sema show last year
                          Wow, I'm surprised it uses the same window frame and glass. However, now that I'm looking at it, I can see how it's possible.


                          Originally posted by Maple50175
                          Oh here we go again. Maples other half.

                          Comment


                            #28
                            f22 turbo making 600hp would belong inthe attack
                            I <3 G60.

                            0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

                            Comment


                              #29
                              look at the headlight switch, possibly using the cb7 steering column as well?

                              Comment


                                #30
                                Originally posted by turbo90accord View Post
                                it uses the front subframe which is mounted in the back of the car, alot of the wiring harness as well as the windshield fram and glass.

                                i spoke with a guy showcasing one at the sema show last year
                                So it's basically a flashy version of what cvandulken is doing to his 3g hatch!






                                Comment

                                Working...
                                X