Anyone Know Tools.....dammit!

[91accord4door]

well today i started doing brakelines on a old cutless, i know , i know its not a honda, anyway i have the whole brake line out except the rear fitting, its between the floor board and the axle wedged, i need to buy a "offset" flare wrench" or something, its hard to explain but my 9/16 flare wrench i have is not working it gets on the fitting but i cant turmn it becuase it hits the floor board and slides off the fitting, anyone know if they make a "offset" flare wrench. autozone dont have any i called. this sucks. do they even make one? i mean how do mechanics do this shit.

[M3kamikaze]

I have to use some 15 degree offset flare nut wrenches at work, so yes, they do make them. Sear's or any other tool place will sell them. They come in sets or you can get them individually for around ~$15.

I hope I'm thinking of the same thing you're looking for.


Is this what you're talking about?

[91accord4door]

thats exactly what i'm talking about exsept i was thinking of the ones shaped like an "S" i have the one in the pic but its not working.thanks

[wed3k]

those things are pimp, my friend let me borrow some for my clutch master cylinder line, works great.

[rebels]

Originally posted by 91accord4door
thats exactly what i'm talking about exsept i was thinking of the ones shaped like an "S" i have the one in the pic but its not working.thanks

Autozone sells a kit of the "S" shaped ones that have the end fittings like the one you need. My friend had to get some tools, and I saw those laying there so I know they have them where all of their tooks like the vice grips, screw drivers, and all that are.