My Custom Red/clear taillights

[CB7_91/DX]

These are my custom made red/clears 92tailights. Let me kno what ya guys think about this

First i took my old CF taillights, i took it apart and my oem taillights too, on the oem 1 cut off the orange signal out then measure it and do it to the clear one too, cut it. (i used a grinder with a 6'' disk to cut it) then take the clear piece add it on the oem taillight seal it from behind with what ever u want. I used tape. Now take the whole piece and put it back in its housing and seal it up.Same goes with the inner lights
sorry guys i dont have more pics of the process.

Results.. as you can see on the right side it comes out a lil bitIts not a big deal to me. This is the best i can do


On my cb now

[The-Gr8-Ox]

damn dude, that looks great, good job

[TypeG]

that doesn't look bad at all. i'd think about putting a black pinstripe down the middle of the taillight where the red and clear meet to break up the line. later.

[hectic702]

Nice work and drop.

[Accrdwgnguy]

Nice man good job! I second the pinstripe too.

[CB7_91/DX]

that doesn't look bad at all. i'd think about putting a black pinstripe down the middle of the taillight where the red and clear meet to break up the line. later.

Ima try that and see how it looks.

[tonylx87]

looks real good man , nice work

[Maple50175]

nice

[jhoff]

wow, you sure you didnt buy them

[Houston93CB7SE]

Nice job

[greenbme89]

looks great!!

[PR CB7]

1000000pts for creativity, all i it takes now is some more prectice for perfection

[1badacc]

SICK crazy idea and it works good job

[lilb_1979]

Wow, nice work man!
Props to you and you diy!!

[TypeG]

what method did you use to seperate the lens from the housing? later.