CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Technical/Performance

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-27-2008, 06:14 PM   #1
7starcb7
Newcomer
 
Join Date: Aug 2007
Posts: 5
7starcb7 is cool... so far.
crazy clearance issues

I did an automatic 5spd. conversion on a 92 accord dx. i swapped the rear mount and used a transmission, mount, and bracket from a 90 Accord EX 5spd.i left the same F22A1 .The transmission and mount couldn't fit.the transmission bolted on but the bracket and mount wouldn't line up. it was impossible to bolt up all four mounts. we switched up the order in which we bolted up the mounts but it didnt matter we read some where that the front mount needed to be changed but that made no diffrence either. finally i put a 97 transmission,mount,&bracket. it fit but on the timing belt side i have no room to take off any of my belts. the crank pulley is less than an 1/8 of an inch away from the chasis. its very tight. to take off any belts i have to unbolt the left and right mounts and pry the engine over . its too much work to do simple maintainance its so tight on that side of the engine bay.

ANYONE HAS A CLUE WHY?????????
7starcb7 is offline   Reply With Quote
Old 04-27-2008, 06:41 PM   #2
Night Wolf
CB7tuner Member
 
Join Date: Apr 2006
Location: Fort Lauderdale, Forida
Posts: 9,225
Night Wolf seems to have made some friends!
Send a message via AIM to Night Wolf
so you put in a 97 tranny with a 97 tranny mount & bracket?

if so you will always have that problem till you get the custom tranny mount. cause from what Ive heard the CD5 & lude mounts push the engine/tranny 1/8s foward & 1/8 to the drivers side.

also I think your suppost to stick some washers under the drivers side mount, but dont qoute me on that.


hope that helps
__________________



93 Accord LX Sedan (sold)
01 Civic LX Sedan (sold)-93 Accord EX Wagon (totaled)
93 Accord SE Sedan (sold)-92 Accord EX Sedan (sold)
93 Accord SE Coupe (sold)-97 Accord SiR Wagon (sold)


95 Accord LX Wagon (CURRENT)-05 Impreza WRX Sedan (CURRENT)-02 Ram 1500 (CURRENT)-20 VW Jetta (CURRENT)
Night Wolf is offline   Reply With Quote
Old 05-01-2008, 05:02 AM   #3
7starcb7
Newcomer
 
Join Date: Aug 2007
Posts: 5
7starcb7 is cool... so far.
which custom mounts have an idea where i could get it from car, dealer, junkyard, special website.??? pplease let me know that info is very helpfull
7starcb7 is offline   Reply With Quote
Old 05-01-2008, 05:22 AM   #4
accord2nr81
CB7tuner Member
 
Join Date: Jul 2007
Location: South Carolina
Posts: 1,260
accord2nr81 is cool... so far.
Send a message via ICQ to accord2nr81 Send a message via AIM to accord2nr81 Send a message via Yahoo to accord2nr81
did you tap the transmission to use the accord mount?
__________________

Please, Leave me some feeedback on my ride ^CLICK ^CLICK ^CLICK
Quote:
Originally Posted by deevergote. View Post
But Honda guys know EVERYTHING about EVERYTHING! If you don't believe that, then you're just wrong...
accord2nr81 is offline   Reply With Quote
Old 05-01-2008, 12:13 PM   #5
nusdogg
CB7tuner Member
 
Join Date: Apr 2008
Location: St. Paul, MN
Posts: 243
nusdogg is cool... so far.
hmm.. never knew that about CDs/BBs.

Quote:
Originally Posted by Night Wolf
so you put in a 97 tranny with a 97 tranny mount & bracket?

if so you will always have that problem till you get the custom tranny mount. cause from what Ive heard the CD5 & lude mounts push the engine/tranny 1/8s foward & 1/8 to the drivers side.

also I think your suppost to stick some washers under the drivers side mount, but dont qoute me on that.


hope that helps
__________________

Quote:
Originally Posted by toycar View Post
Braking the bank, maybe. Feeling like a boss, likely.
nusdogg is offline   Reply With Quote
Old 05-02-2008, 07:03 PM   #6
7starcb7
Newcomer
 
Join Date: Aug 2007
Posts: 5
7starcb7 is cool... so far.
no, just used the same year(97) mount bracket and tranny it bolted right up no taqpping was necessary
7starcb7 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:55 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.