I'm going to be reusing my tranny from the f22, but I'm not sure how to remove it from the engine block. My chilton manual doesn't show how to either, and I don't have the money for a helms, nor could i find anything online so far. I've already removed the axles and intermediate shaft, and that's about it. where are the other bolts located to take it off? Any pictures to help show where they are would greatly be appreciated!
Announcement
Collapse
No announcement yet.
Transaxle Removal
Collapse
X
-
There is a youtube video by Honda How To that is on a Prelude, the only thing I saw was different was some block to transmission L shaped bracket was on the Prelude and not the Accord.Be unique, like every other person.
CB7 Sold________________________E34 Sold________________________E39 Current
-
Originally posted by 92accordkidd View Postthis video should help u out alot http://www.youtube.com/watch?v=qv-wb-VltZYBe unique, like every other person.
CB7 Sold________________________E34 Sold________________________E39 Current
Comment
-
I'm curious, why did you pull the engine without the transmission the first time.Be unique, like every other person.
CB7 Sold________________________E34 Sold________________________E39 Current
Comment
-
I didn't, the transmission was on the engine when I pulled it out. And if you're curious why I did take it out as a whole, it was because I only had under 30 minutes to do anything that day and just went balls to the wall. I had the lever that adjusts the angle of the engine and I pulled it out so the tranny wouldn't hit the mounting bracket.
JDM powered CB7
Comment
Comment