Cisco NA F22 non-VTEC SOHC Project - Full Street White

[HondaFan81]

Vehicle:

1991 Accord EX Sedan 5-spd (Frost White)

Goal:

To have a fun all-around performance streetable F22ax NA Accord on pump gas that retains core OEM engine design.

Thanks To:

Kelly from Bischoff Automotive
Jeff from CHR Motorsports (www.chrracingproducts.com)
Bisi from Bisimoto Engineering (www.bisimoto.net)
Aaron from Pure Tuning (www.pure-tuning.com)
Larry from Endyn (www.theoldone.com)
Jeff from Blueprint Racing (www.blueprintracing.com)
Scott from Collective Racing (www.collectiveracing.net)
Willie
Nic
Francis
Scott
Juan
Nate
Jason

Car Photo:

[HondaFan81]

FROST WHITE - 1991 ACCORD EX 5MT SEDAN

Engine Management/Tuning Related Parts:

Hondata S300 System w/datalogging >> INSTALLED
Chipped P06 ECU >> INSTALLED

Ignition System:

MSD SS Blaster Coil >> INSTALLED
MSD External Coil Distributor Cap/New OEM Rotor >> INSTALLED

Fuel System:

RC 550 cc/min Peak & Hold Injectors >> INSTALLED
Summit Racing Fuel Pressure Liquid Gauge >> INSTALLED
Aftermarket Fuel Pressure Regulator >> INSTALLED
Walbro 255 lph Fuel Pump >> INSTALLED

Intake System:

Cone filter with 3" Intake Piping >> Installed
Professional Products 68mm Throttle-body >> INSTALLED
H/F Modified & Ported Intake Manifold >> INSTALLED
Bisimoto Phenolic Intake Manifold Gasket >> INSTALLED

Cylinder Head:

CHR Motorsports Ported/Reconditioned F22ax Head >> INSTALLED
Bisimoto F22 Camshaft >> INSTALLED
Bisimoto Single Spring Upgrade w/Titanium Retainers >> INSTALLED
Bisimoto Teflon Exhaust Rocker Spacer Kit >> INSTALLED

Engine Block:

Kaizenspeed Balance Shaft Eliminator Kit >> INSTALLED
Endyn Modified OEM Honda Oil Pump >> INSTALLED
OEM F22a6 Motor Oil Cooler, Windage Tray, Oil Pickup >> INSTALLED
Bisimoto/Arias F22 86mm Pistons 12:1 Compression (pins, locks, rings) >> INSTALLED
ARP H23 Head & Main Stud Kits >> INSTALLED
Probe F22/H23 Forged Rods w/ARP 8740 Rod Screws >> INSTALLED
Stock F22ax 95mm Crankshaft >> INSTALLED

Exhaust System:

Bisimoto F22ax Coated Street Header >> INSTALLED
3" Mandrel-bend SS Exhaust Piping >> INSTALLED
3" Custom SS Resonators (22" + 15") >> INSTALLED
3" High-flow Seamless SS Catalytic Converter >> INSTALLED
3" Magnaflow SS Dual-tip Muffler >> INSTALLED

Drivetrain:

CorSport Aluminum Tranny Shifter Bushings >> INSTALLED
Competition 8.5 lb. Flywheel >> INSTALLED
Competition Stage 4 Sprung Clutch Kit >> INSTALLED
Fushigi Short Shifter >> INSTALLED

Suspension:

Full Poly Bushing Suspension >> INSTALLED
ESP Poly Motor Mount Kit >> INSTALLED
Koni/Neuspeed Edition Shocks >> INSTALLED
Neuspeed Race Springs >> INSTALLED
Progress Rear Sway Bar w/Polyurethane End-links >> INSTALLED
Neuspeed Front Upper Chassis Brace >> INSTALLED
DC Sports Rear Upper Chassis Brace >> INSTALLED
Ingalls 1.25 - 3 Degree Front Camber Kit w/Polyurethane Bushings (anchor bolt style) >> INSTALLED
DIY Rear Washer Camber Kit (2 - 3/8" I.D. washers under each screw) >> INSTALLED

Brake System:

EBC Sport Slotted Front Rotors >> INSTALLED
Hawk HPS Front Pads >> INSTALLED
Rear Drum Brake Restoration >> COMPLETED

Wheels/Tires:

90-91 Accord EX Alloy 15x5.5" Rims, 195/60 Yokohama A550H Tires >> CURRENTLY INSTALLED
Rota Slipstream 16x7" Rims, 205/50 Toyo Proxes T1R Tires

[HondaFan81]

Suspension/Brake Upgrade:

[HondaFan81]

Twisted Imports Performance Parts (Willie):

** Excellent service, good communication and quick shipment. **

Competition Stage 4 Clutch Kit:



Competition 8.5 lb Flywheel:

[HondaFan81]

Bisimoto Engineering Performance Parts (www.bisimoto.net >> Bisi Ezerioha):

** Unbelievable guy with so much information, fantastic service and shipment, top-of-the-line parts, absolutely no problems. **

F22 Valvetrain Upgrade w/Titanium Retainers:



No-Slip Adjustable Cam Gear:



F22ax Camshaft:



F22 Teflon Exhaust Rocker Spacer Kit:



Arias/Bisimoto F22 12:1 Piston Kit:



F22AX/H23 Phenolic Intake Manifold Gasket:

[HondaFan81]

CHR Motorsports Headwork (www.chrracingproducts.com >> Jeff Fredenburg):

** Excellent work, great communication, very honest and willing to help you out on any problem. Using him a 2nd time for headwork. **

[HondaFan81]

Other Engine Build-Up Parts:

Fuel Pressure Regulator:



Modified H23 Intake Manifold:





69mm Throttle-Body:



Probe Forged Rods:



3" Seamless High-flow SS Catalytic Converter:



3" Magnaflow SS Muffler:



3" Custom SS Resonators (15" and 22" long):



Kaizenspeed Balance Shaft Eliminator Kit:

[HondaFan81]

Interior Restoration:

Work Completed:

- Water leaks fixed, including resealing front & rear windows
- Entire floorpan painted with black chassis paint
- Interior plastics & vinyl dyed black
- Reupholstered seats in new charcoal grey cloth
- Autometer A-pillar 2 gauge pod installed
- New OEM black rearview mirror installed
- OEM 91 Accord SE black leather steering wheel installed
- OEM 91 Accord SE black leather inside door panels installed
- OEM black hood, gas, trunk levers installed
- OEM black rear upper deck installed
- OEM black floor carpet installed
- OEM black from 90-91 auto & lap seat-belt bases installed
- OEM black rear seat belts installed
- Front visors dyed black
- Inside upper pillar panels painted black (headliner OEM lofty gray)
- Many misc. fixes so all interior components work

[HondaFan81]

Engine Build Progress:


Teardown:












DIY Preparation Work:



^^ cam lobe interference ^^



^^ phase 1 - rough material removal/grinding ^^



^^ phase 1 - completed & cleaned ^^



^^ cam lobes clear ^^



^^ phase 2 - cam lobe minimal clearance of lower oil galley, will have material removed using a vertical mill ^^

[HondaFan81]

Engine Build Progress (continued #2):


Work Accomplished:

- magnafluxed/checked crankshaft
- polished crankshaft
- main bore line hone
- deck the block
- fit pistons to rods
- bore & honing cylinders to 86mm pistons (1mm over stock F22)
- balance rotating assembly (crank pulley, stock crank, 8.5 lb flywheel)

[HondaFan81]

Engine Build Progress (continued #3):


Assembly:

* Bisi teflon spacer kit installed. *


* Kaizenspeed kit installed into main girdle. New OEM oil pump modified by Endyn, not shown. *










Install:

[bmxicansd]

Francisco,

Dang your car is going to be a beast! Thanks for buying my tranny, although it was sad to see it go, i'm glad it's going to good use. The tranny is super clean, so it should match your CLEAN ASS MOTOR BUILD UP, keep us posted on how it comes out, and lastly thanks for being such a trouble free buyer. Hope all is well, and let me know if you need anything else.

btw, you know anyone looking to buy a 94 h22a shortblock????? Its a good core block for someone to do a motor buildup! let me know.

thanks craig

[H23Accord]

I am very impressed with how you have set this thread up. I look forward to seeing the final product at a future meet. Keep it off the curbs!

[Raceboy]

damn man, your going off on that car! keep up the good work. must be nice to mod out 2 cb7's.

[KillerCam282]

Sexiness...Damn, I wish I could just use the M2B4 tranny for my build...