Announcement

Collapse
No announcement yet.

Shift light install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Shift light install

    alright guys.. wats the easiest way to wire a a shift light?

    3 wires.. i know how to wire the positive and negative.. but where do i wire the green signal wire?

    any info will help.. except those who give me bs whore answers like "good luck"

    #2
    blue wire on dist. or you can tap a blue wire that goes into the bottom right plug for the cluster. but its easier to run it to the dist wire.

    Comment


      #3
      Originally posted by clarksterdotcom
      blue wire on dist. or you can tap a blue wire that goes into the bottom right plug for the cluster. but its easier to run it to the dist wire.
      ^^^^
      "Know Your Rank"

      Comment


        #4
        Originally posted by clarksterdotcom
        blue wire on dist. or you can tap a blue wire that goes into the bottom right plug for the cluster. but its easier to run it to the dist wire.
        on the distributer.. do i have to open it? or just find a wire comming out of it...

        93lx - your response is what i ment about post whoring.

        Comment


          #5
          awww jed. h22 swapped and cant find the blue wire? ahhaha jp man. its all good its visible just by looking at the cap. it actually runs all the way near the main harness but the most accessible length of wire with out cutting away at the wire loom etc is near the dist.

          Comment


            #6
            Originally posted by clarksterdotcom
            awww jed. h22 swapped and cant find the blue wire? ahhaha jp man. its all good its visible just by looking at the cap. it actually runs all the way near the main harness but the most accessible length of wire with out cutting away at the wire loom etc is near the dist.
            quit clowning! LoL thanks for the info. i look at my engine bay when my car cools down.. i just came back from a 2 hour drive.

            Comment


              #7
              is it this one?

              Comment


                #8
                bump

                Comment


                  #9
                  yes that is the right loom of wires but...

                  i was also told blue but it didn't work for me. i actually tapped off the yellow/green wire (or was it green/yellow wire, but i'm sure it was those two colors!) for my shift light. i was told this by an h22-swapped accord owner so it should be perfect for you jed.
                  1cor10:31
                  - 92 LX coupe
                  - 96 EX wagon (sold)

                  Comment


                    #10
                    i already tried it and it works... thanks clark... thanks for the tip tim.

                    ill post up pictures on how it looks..

                    Comment


                      #11
                      another satisfies homey lol

                      Comment


                        #12
                        Im eating rice


                        Dynamic racing

                        Look out for 4 point cb7 strut bars for dohc!!!

                        Originally posted by deevergote
                        bleh... i just put like 5 ounces of vodka in a 12 oz cup of mango iced tea...

                        Comment


                          #13
                          watcha mean by that?

                          Comment


                            #14
                            i had left over vacuum hoses so i used one to cover up my wire.. so far it looks pretty good.




                            Comment


                              #15
                              Originally posted by micksf22accord
                              Im eating rice
                              how is it rice its just a shift light even tacs arnt rice if there uesed
                              www.2camcrew.com

                              Comment

                              Working...
                              X