I want a k20

[93accordEX]

that is all... yes Im serious and I don't think there is any info on swapping this into an accord but if anyone has info/ideas share them here.

[Kabuki]

Re: I want a k20

Originally posted by 93accordEX
that is all... yes Im serious and I don't think there is any info on swapping this into an accord but if anyone has info/ideas share them here.

I'm sure that it can be done, but you might just want to use the K24, and swap the head at a later date. Less expensive, more abundant, similar power and more torque... You'd be looking at not only doing an engine/transmission swap, but also mounting the alternator, P/S pump, and A/C compressor on the other side of the engine bay, if not replacing them entirely. It's a big job, and your car will be down for quite a while. But it can be done.

[f22a]

hasport says that they will be making mount kits for the 5th gen accord first, then 6th gen, then 4th gen.

[NutBucket]

That's gonna be one hell of a swap. I think I've seen a K20 into either an EK or EG.

[93accordEX]

thats good to know actually, hopefully by the time they make the mounts it will be a more common swap with more info available. I mean I know off the top of my head wiring and a header are going to be 2 major problems. im sure there is lots of other little details too... I wonder what axles could be used. but anyways this engine has so much potential. 300whp all motor cars on pump gas are definetly in the future. Im thinking destroked k24 block with the k20a head and 6 speed lsd tranny actually. plus hopefully more cars with these engines will be totalled and the prices will come down by the time mounts are made. lol

[1CrawlinAccord]

It will be an awesome swap, that's all I have to say. 300 whp all motor Accords are very nice.

[93accordEX]

oh by the way another thing I read about this is that its lighter then a b16. also since its on the passenger side it kind of cancels the weight of the driver maybe? well maybe more then the engine being on the same side at least. overall it should help handling though, especially because of more weight loss in the front end.

[92accordDx]

how much can you get a k20 for? i have seen them in and eg before

[92accordDx]

damn hmotorsonline wants 5500 for them heres a link they have them in eg
http://www.honda-tech.com/zerothread?id=763017

[quikf20a]

k20 in crx help

a buddy of mine is trying to swap a k20 into a crx if anybody has some info i should know please lemme know or pm me thanx, and lemme know how that swap turns out!

[pwrd_v_tec1990]

Originally posted by f22a
hasport says that they will be making mount kits for the 5th gen accord first, then 6th gen, then 4th gen.

Do you have something that quotes this... if so I'd like to read it. Sounds interesting but wonder how much the kit will run.