F22A6 Intake Manifold
What you need: the parts, gaskets, the recommended parts from the parts list, a way to lift/support the car, your average tool set with the 10mm and 12mm sockets being most used, a catch pan for fluids, patience and the right attitude!
PARTS LIST (Or I should say, the parts I ended up using...)
Epoxy – $2.27
Carb Cleaner - $0.88 x7 = $6.16
3/16 Metal Drill Bit - $0.94
Oil Filter - $3.17
Antifreeze - $7.27 x2 = $14.54
Motor Oil-5 quarts Synthetic - $19.82
I got those above items from walmart
EGR plug - $0.31 x6 = $1.86
Honda Part Number 17199-PT3-AHM, Try your local Honda Dealership
I got mine from Coggin Honda of Fort Pierce, Florida
Slide Hammer – $9.99
I bought a 3 pound, but a 2 pound is recommended
Nylon Brush - $0.99
These were just used for scraping away junk...
Brass Brush - $0.99
You can find those at a hardware store.
I got mine at Harbor Freight Tools.
Seafoam - $4.98 (If you're doing a seafoam job)
Napa Auto Parts tends to keep it stocked, I got mine at Discount auto.
Intake Manifold Gasket - $9.68
Felpro part number FEL MS94781, thats the part number for Bennett Auto supply, your local auto parts store may carry a different brand. Note on the above item, I tried Discount Auto for this part. Their computer and even the box said “f22a6”, but it was an a1/a4 manifold gasket, so you may want to be a dick and open it before you buy it!
Throttle Body Gasket - $2.78
Felpro Part number FEL 60778
Oil Plug Crush Washers – $1.89
Oil-tite product MOT 65292 (M14 aluminum)
EGR Gasket - $1.51
Felpro part number FEL 70978. Note on the EGR gasket, when I removed my EGR valve, there was no gasket, so it may not be required, but I stuck it on anyway.
I got all that stuff at Bennet Auto Supply, but you should be able to find it at your local auto supply store.
Comment