I WENT TO THE GOOD OLD PARTS STORE AND GOT MYSELF A CHEAP $9.99 FLIMSY ANTENNA. MY POWER ANTENNA LIKE MOST OF OURS DOES NOT GO UP OR DOWNFULLY AND ITS NOT WORTH TH HASSEL OF REPLACEING THE MAST I TRYED AND THINGS GET BROKEN VERY EASILY DUE TO THE AGE OF THE PLASTIC.
TOOLS NEEDED: ONE DREMEL TOOL WITH CUT OFF WHEEL!
HERE IS WHAT IT LOOKS LIKE AFTER YOU HAVE TAKEN IT APART:
FIRST THING THAT YOU ARE GOING TO HAVE TO DO IS TAKE THE MAST AND TAKE THE INARDS OUT OF IT AND IT SHOULD LOOK LIKE THIS:
AFTER YOU HAVE DONE THAT YOU NEED TO CUT BOTH SECTIONS TO YOUR DESIRED LENGTH LIKE I DID WITH MINE:
NOTE: I CUT MINE DIRECTLY IN HALF BECAUSE I LISTEN TO THE RADIO ALOT AND STILL WANTED SOME RECEPTION FOR IT, BUT DO AS YOU PLEASE BECAUSE ITS YOUR CAR
THE NEXT STEP IS TO REASEMBLE EVERYTHING LIKE THIS:
THE NEXT STEP WOULD BE TO RIP OUT THAT NOISEY CLICKING POWER ONE AND PUT THIS ONE ON.
TOOLS NEEDED: ONE DREMEL TOOL WITH CUT OFF WHEEL!
HERE IS WHAT IT LOOKS LIKE AFTER YOU HAVE TAKEN IT APART:
FIRST THING THAT YOU ARE GOING TO HAVE TO DO IS TAKE THE MAST AND TAKE THE INARDS OUT OF IT AND IT SHOULD LOOK LIKE THIS:
AFTER YOU HAVE DONE THAT YOU NEED TO CUT BOTH SECTIONS TO YOUR DESIRED LENGTH LIKE I DID WITH MINE:
NOTE: I CUT MINE DIRECTLY IN HALF BECAUSE I LISTEN TO THE RADIO ALOT AND STILL WANTED SOME RECEPTION FOR IT, BUT DO AS YOU PLEASE BECAUSE ITS YOUR CAR
THE NEXT STEP IS TO REASEMBLE EVERYTHING LIKE THIS:
THE NEXT STEP WOULD BE TO RIP OUT THAT NOISEY CLICKING POWER ONE AND PUT THIS ONE ON.
Comment